Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75CM
The AirTAC Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75CM is a genuine double acting + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75CM
Designed with a variable air cushion at both ends, the AirTAC MFC32X75CM mini cylinder absorbs high-speed end-of-stroke shock to protect your payload and reduce workshop noise. This JIS-standard round-body actuator features a SUS304 stainless barrel and riveted aluminium covers, offering reliable mild corrosion resistance for washdown or humid settings. It uses a two-way oil-retaining seal and a fixed anti-impact pad on the front cover.
Fitted with a 75 mm stroke and a CM round-end rear cover, this double-acting 32 mm bore unit pushes 402.2 N and pulls 345.6 N at 0.5 MPa. The body is purposefully shorter than an ISO 6432 cylinder for the same bore and stroke, saving valuable mounting length. It provides a safe working load of roughly 241 N, lifting about 20.5 kg vertically with a 2:1 margin. Air connects via a 1/4" port.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75CM Technical Specifications
| Model | Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75CM |
|---|---|
| Series | MFC JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75CM
| MFC | JIS-standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75CM Is Used
Package Diverting
Uses the 402.2 N push force to deflect medium-weight cartons at high speed, relying on the variable air cushion to halt the 75 mm stroke smoothly without jarring the belt.
Light Pressing
Applies steady downward pressure for bearing seating or light assembly tasks, where the 241 N safe working load prevents component damage during automated placement.
Vertical Lift Gates
Raises and lowers access flaps on sorting machines; the SUS304 barrel withstands dusty humidity while the CM round-end cover fits neatly into tight frame cavities.
Is the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75CM the Right Cylinder?
When sizing this 32 mm bore, step down to the MFC25 for 245.3 N @0.5 MPa if your load is lighter, or move up to the MFC40 for 628.3 N @0.5 MPa when you need 628.3 N of push force. The needle-set variable air cushion is essential for high-speed cycling or moving heavy masses, letting you dial in the exact deceleration to prevent end-cap banging.
Because this specific SKU lacks the -S magnet, it cannot accept CMSG, DMSG, or EMSG position switches; order an -S variant if you require sensing. Remember that the cushion only decelerates the stroke end and is not a brake. If the air supply drops, the piston will drift, so fit an external rod lock or pilot check valve for suspended loads. Mounting options include LB foot, FA flange, SDB pivot, and TC trunnion.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75CM FAQ
This 32 mm bore double-acting cylinder has a 1/4" air port and a male M10x1.25 rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot host CMSG, DMSG, or EMSG switches. You must order the -S variant to enable magnetic sensing. The variable air cushion at both ends only decelerates the piston near stroke end and does not lock the load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.