Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCA
The AirTAC Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCA is a genuine double acting + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCA
Tuned for high-speed actuation, the MFC32X75SCA relies on a needle-adjustable variable air cushion at both ends to decelerate the piston smoothly, eliminating the end-of-stroke bang typical of bumper mini cylinders. This JIS-standard round-body unit features a SUS304 stainless barrel and riveted aluminium covers, yielding a body that is physically shorter than an ISO 6432 cylinder for the same 32 mm bore and 75 mm stroke.
Generating 402.2 N of push force and 345.6 N of pull force at 0.5 MPa, it fits neatly into medium-duty machinery. The integrated CA rear pivot simplifies angular mounting, while the 1/4" port matches the 32 mm bore airflow demands. Because this SKU includes the -S magnet, it is fully compatible with CMSG, DMSG and EMSG position switches.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCA Technical Specifications
| Model | Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCA |
|---|---|
| Series | MFC JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCA
| MFC | JIS-standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCA Is Used
Package Diverting
Handles 75 mm sorting strokes at speed, using the adjustable air cushion to stop the diverter arm gently without jarring the conveyor frame.
Light Pressing
Applies up to 402.2 N of push force for seating small bearings, with the cushion absorbing the impact when the tooling bottoms out.
Pallet Stops
Deploys a 32 mm rod to halt pallets on a line, relying on the needle valves to decelerate the load and protect the packaged goods.
Is the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCA the Right Cylinder?
When sizing this 32 mm bore, verify your load against the 402.2 N push force at 0.5 MPa. If your application is lighter, step down to the MFC25 which provides 245.3 N; if you need more muscle, the MFC40 pushes 628.3 N. The variable air cushion is essential for heavy or fast-moving loads, but remember it only decelerates near the stroke end. It will not hold position on air loss, so install an external rod lock or pilot check valve if drifting poses a hazard. Mounting is flexible via the CA pivot, foot, flange, or trunnion options.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCA FAQ
This 32 mm bore cylinder features a 1/4" port and an M10x1.25 male rod thread. It generates 402.2 N push and 345.6 N pull at 0.5 MPa, increasing to 563 N push and 483.8 N pull at 0.7 MPa. The theoretical maximum force is 82 kgf at 1.0 MPa.
No. The variable air cushion only decelerates the piston near the stroke end and acts purely as a shock absorber, never as a brake. If you need to prevent drift on air loss, you must add an external rod lock or pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X75SCA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.