Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X95CM
The AirTAC Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X95CM is a genuine double acting + cushion JIS-standard round-body mini air cylinder with a Ø32mm bore and 95mm stroke, 1/4" air ports and a SUS304 stainless-steel barrel for mildly corrosive environments. For the same bore and stroke it is shorter than an ISO 6432 cylinder, saving mounting space.
- BoreØ32 mm
- Stroke95 mm
- Port size1/4"
- Acting typeDouble acting + cushion
- Rod threadM10×1.25
- CushionVariable air cushion, both ends
About the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X95CM
Delivering 402.2 N of push force at 0.5 MPa, the AirTAC MFC32X95CM is a JIS-standard round-body mini cylinder built for demanding actuation. It features a SUS304 stainless steel barrel with riveted aluminium covers, resisting mild corrosion and washdown environments. For the same bore and stroke, this riveted body is notably shorter than an ISO 6432 cylinder, saving valuable mounting length.
The defining trait of the MFC series is the variable air cushion at both ends, allowing you to turn a needle to soak up high-speed end-of-stroke shock. This 32 mm bore unit uses a 1/4" port and a 12 mm rod. Because this specific SKU lacks the -S magnet, it cannot take a magnetic switch. Factoring a safety margin, it handles a safe working load of roughly 241 N, lifting about 20.5 kg vertically.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X95CM Technical Specifications
| Model | Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X95CM |
|---|---|
| Series | MFC JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 95 mm |
| Acting type | Double acting + cushion |
| Port size | 1/4" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Variable air cushion, both ends |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MF/MFC (JIS-standard) datasheet. Barrel: SUS304 stainless steel; covers: aluminum alloy (round-body, riveted rolling-packed construction). Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X95CM
| MFC | JIS-standard round-body mini cylinder (double-acting, variable cushion). |
|---|---|
| 32 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
MF-family variants: MF / MFC (double acting ±cushion), MSF / MTF (single acting push / pull), MFD / MFCD (double rod ±cushion), MFJ / MFCJ (adjustable stroke ±cushion). Back covers CA / U / CM. Mounting LB / FA / SDB / TC.
Where the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X95CM Is Used
Package Diverting
Uses the 402.2 N @0.5 MPa thrust to push parcels off a high-speed belt, relying on the variable air cushion to halt the 95 mm stroke without slamming.
Light Pressing
Holds a component in place during machining, where the 241 N safe working load provides firm, stable clamping force.
Vertical Lifting
Raises small fixtures weighing up to 20.5 kg, with the adjustable cushion preventing shock damage at the top of the stroke.
Is the Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X95CM the Right Cylinder?
When sizing this 32 mm bore, check both extremes: step down to an MFC25 for 245.3 N @0.5 MPa if loads are lighter, or step up to an MFC40 for 628.3 N @0.5 MPa when you need more thrust. The variable air cushion is essential when cycling at high speeds or moving heavy masses, as it decelerates the piston smoothly. Note that the cushion only slows the rod near stroke end; it is not a brake.
This model includes a CM round-end rear cover and uses a 1/4" port. It does not hold position on air loss—the piston will drift if pressure drops, so add an external rod lock or pilot check valve for suspended loads. To use CMSG, DMSG or EMSG sensors, you must specify the -S magnet variant, as this base SKU cannot accept a switch.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Back cover (CA/U/CM) & mount (LB/FA/SDB/TC)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check Use correct back cover (CA/U/CM) & mount (LB/FA/SDB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X95CM FAQ
This 32 mm bore cylinder features a 1/4" port and a 12 mm rod. It generates a push force of 402.2 N and a pull force of 345.6 N at 0.5 MPa. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa.
No, this specific SKU does not include a magnet, so it cannot accept CMSG, DMSG or EMSG switches. You must order the -S variant for sensing. The cylinder uses a SUS304 stainless barrel and a CM round-end cover, and its variable air cushion at both ends only decelerates the load near stroke end.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MFC Cushioned Stainless Steel Mini Cylinder MFC32X95CM
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.