Airtac MGD Double Rod Mini Cylinder MGD32X150

The AirTAC MGD32X150 is a double acting, double rod JIS mini cylinder with a 32 mm bore and 150 mm stroke. A 12 mm rod exits both the front and rear covers with the same M10x1.25 male thread at each end, so the through-rod resists rotation and side load, drives two loads at once, or carries a stop flag on the rear end. Because both chambers see the rod-side area, the output force is equal in both directions: about 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a theoretical maximum of 70.5 kgf at 1.0 MPa. Ports are 1/8" on this bore, and the maximum standard stroke for a 32 mm MGD is 500 mm, so 150 mm sits comfortably within the standard range.

Construction follows the JIS round-body footprint: a SUS304 stainless barrel with hard-chrome plated carbon-steel rods, riveted covers, and a two-way lubricant-storing piston seal, suited to damp or washdown surroundings. A fixed anti-impact bumper pad decelerates the stroke end; it is not an adjustable air cushion. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, air filtered to 40 um, -20 to +70 C, and speeds of 30-800 mm/s. For a realistic working load, budget roughly 0.6 of the force, and for a vertical lift keep it near 18 kg. Note that the cylinder does not hold position on air loss; use an external rod lock or pilot check valve for a held load.