Airtac MGD Double Rod Mini Cylinder MGD32X75
The AirTAC Airtac MGD Double Rod Mini Cylinder MGD32X75 is a genuine double acting, double rod JIS-standard round-body mini air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a SUS304 stainless-steel barrel with a hard-chrome-plated rod for reliable, mildly corrosion-resistant service.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM10×1.25
- CushionFixed anti-impact bumper pads
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac MGD Double Rod Mini Cylinder MGD32X75
The AirTAC MGD32X75 is a double acting, double rod JIS mini cylinder with a 32 mm bore and 75 mm stroke. A 12 mm rod exits both the front and rear covers with the same M10x1.25 male thread at each end, so the two rod ends move together and the force is identical in both directions: about 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a theoretical maximum of 70.5 kgf at 1.0 MPa. Because both chambers see the rod-side area, there is no separate push and pull rating. The through-rod resists rotation and side load, keeps stroke-end position repeatable, and leaves the rear rod end free to carry a stop flag or drive a second load. At a realistic working load of roughly 0.6 of the force, plan on about 20 kgf of usable thrust each way, or about 17 kg halved for a safe vertical figure.
Construction follows the JIS round-body mini format: a SUS304 stainless barrel with riveted covers and a hard-chrome plated rod for damp or washdown environments. A fixed anti-impact bumper pad softens each stroke end, though it is not an adjustable air cushion and it will not hold or brake a load. Ports are 1/8" on every MGD bore, the thread is PT, and operating pressure spans 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating. This SKU has no magnet, so no sensor can be fitted; add the S code for CMSG, DMSG or EMSG switches. Mounting is FA flange or LB foot, with I and Y rod knuckles available.
Airtac MGD Double Rod Mini Cylinder MGD32X75 Technical Specifications
| Model | Airtac MGD Double Rod Mini Cylinder MGD32X75 |
|---|---|
| Series | MGD JIS mini cylinder |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Fixed anti-impact bumper pads |
| Max standard stroke | Up to 500 mm |
Specifications follow the official AirTAC MG-series (JIS standard) datasheet. Barrel: SUS304 stainless steel (round-body, riveted construction); piston rod: carbon steel with 20µm hard-chrome plating. Thread options: PT (blank) / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac MGD Double Rod Mini Cylinder MGD32X75
| MGD | JIS round-body mini cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSG / DMSG / EMSG sensors. |
| FA / LB | Mounting: FA flange, LB foot. |
MG-family variants: MG / MGC (double acting ±cushion), MSG / MTG (single acting push / pull), MGD / MGCD (double rod ±cushion). Accessories: LB foot, FA flange, plus I and Y knuckles. Thread PT (blank) / G / NPT.
Where the Airtac MGD Double Rod Mini Cylinder MGD32X75 Is Used
Anti-rotation slide
The through-rod on the MGD32X75 resists rotation and side load, keeping a 75 mm slide tracking straight with 345.6 N of thrust available in either direction.
Twin-load push
Drive two workpieces at once from the front and rear rod ends, each seeing the same 345.6 N at 0.5 MPa, ideal for symmetric transfer or dual-station clamping.
Rear stop flag
Use the back rod end to carry a stop or indicator flag on a fixture, with the fixed bumper pad decelerating each stroke end for repeatable positioning.
Is the Airtac MGD Double Rod Mini Cylinder MGD32X75 the Right Cylinder?
At 32 mm bore the MGD32X75 delivers 345.6 N each way at 0.5 MPa, sitting between the 25 mm bore (206.1 N) and the 40 mm bore (527.8 N), which is the largest MGD. Step up to 40 mm if your load needs more thrust, or down to 25 mm to save space. If you need a 50 or 63 mm bore or an adjustable cushion, move to the MGCD double-rod series; for a conventional single-rod cylinder, the MG is the equivalent. Choose the double rod when you need anti-rotation, equal force both directions, a rear-mounted switch or stop flag, or a second driven load. Mount with FA flange or LB foot and add I or Y knuckles on the rod ends. This model has no magnet, so specify the S code if you need CMSG, DMSG or EMSG position sensing. On long strokes, support the side load carefully since the through-rod helps but does not eliminate guidance duty. The cylinder does not hold position on air loss, so use an external rod lock or pilot check valve for a held load.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT / G / NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting (LB / FA) & knuckle
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Do not dismantle the riveted front/back covers.
- check On first run, back off the cushion/impact settings and release gradually.
- check Installation by qualified personnel per AirTAC docs.
Airtac MGD Double Rod Mini Cylinder MGD32X75 FAQ
Because it is a double rod cylinder, force is equal in both directions: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a theoretical maximum of 70.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure is 1.5 MPa (215 psi), temperature range is -20 to +70 C, speed is 30-800 mm/s, and the fluid is air filtered to 40 um. Ports are 1/8" and the maximum standard stroke for a 32 mm MGD bore is 500 mm.
The MGD has a rod exiting both covers with the same M10x1.25 thread at each end, so force is equal both ways and the through-rod resists rotation, while the MG has a single rod with a larger extend force. The MGD uses a fixed anti-impact bumper pad rather than the adjustable cushion of the MGCD. This SKU has no magnet, so no sensor can be mounted; order the S code to enable CMSG, DMSG or EMSG switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac MGD Double Rod Mini Cylinder MGD32X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.