verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAI32 Standard Cylinder SAI32X1000

The AirTAC SAI32 Standard Cylinder SAI32X1000 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 1000mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke1000 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$103.59 $114.27Save 9% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAI32 stroke, mounting and version on one page All SAI32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAI32 Standard Cylinder SAI32X1000

The AirTAC SAI32X1000 is a double-acting ISO 15552 profile cylinder featuring a 32mm bore and a 1000mm stroke. Delivering 563N of push force at 0.7 MPa, this unit is built for long-traverse material handling. The extruded aluminum barrel omits tie rods for a clean exterior.

This configuration features a standard carbon steel piston rod and PT tapered port threads. Because it lacks the -S magnet suffix, it is optimized for purely mechanical actuation without requiring electronic sensor feedback.

Airtac SAI32 Standard Cylinder SAI32X1000 Technical Specifications

ModelAirtac SAI32 Standard Cylinder SAI32X1000
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke1000 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N—
Max (@1.0 MPa)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAI32 Standard Cylinder SAI32X1000

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×1000Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAI32 Standard Cylinder SAI32X1000 Is Used

conveyor_belt

Long-Transfer Conveying

Pushes products or diverters along a 1000mm linear path where extended reach is required.

warehouse

Warehouse Shuttle

Moves lightweight totes or bins between storage zones using 563N of thrust at 0.7 MPa.

precision_manufacturing

Film Web Handling

Actuates guiding arms over a wide span in packaging machinery without tie-rod obstructions.

Is the Airtac SAI32 Standard Cylinder SAI32X1000 the Right Cylinder?

A 32mm bore provides 402N push force at 0.5 MPa; stepping up to a 40mm bore increases that to 628N for heavier payloads. At 1000mm of stroke, the unsupported rod is highly susceptible to bending under side loads. Mounting external guide rails or selecting a guided cylinder is strongly recommended to prevent rod-bearing damage.

This model serves as a direct replacement for any ISO 15552 cylinder with a 32mm bore, 1000mm stroke, and PT G1/8 ports. It accepts standard LB foot or FA flange accessories. Note that standard air cushions only decelerate the piston near end caps; if the air supply drops, the load will drift, requiring an external check valve for position holding.

AirtacDistr lists every SAI32 order code with its price on one page at https://airtacdistr.com/products/airtac-sai32-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAI32 Standard Cylinder SAI32X1000 FAQ

At 0.7 MPa operating pressure, the SAI32X1000 provides a push force of 563N and a pull force of 345N.

Yes, the SAI32X1000 is dimensionally interchangeable per ISO 15552. It shares the same 32mm bore, 1000mm stroke, and G1/8 port mounting interface as comparable standard profile cylinders.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAI32 Standard Cylinder SAI32X1000

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAI32X1000 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.