verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAI32 Standard Cylinder SAI32X105

The AirTAC SAI32 Standard Cylinder SAI32X105 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 105mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke105 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$49.54 $56.58Save 12% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAI32 stroke, mounting and version on one page All SAI32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAI32 Standard Cylinder SAI32X105

The AirTAC SAI32X105 is a double-acting ISO 15552 profile cylinder featuring a 32mm bore and a 105mm stroke. Because 105mm is not a standard catalog increment, this specific length is manufactured as a non-standard, made-to-order stroke. It delivers a push force of 402 N and a pull force of 345 N at 0.5 MPa, making it well-suited for compact actuation tasks that require precise intermediate travel distances.

This unit utilizes a standard carbon steel piston rod and PT tapered port threads. The extruded aluminum barrel includes sensor grooves on both sides, allowing for straightforward position detection if a magnet is added later. For higher temperature environments up to 70 C, the standard TPU seals can be swapped for Viton (H) or NBR (N) options.

Airtac SAI32 Standard Cylinder SAI32X105 Technical Specifications

ModelAirtac SAI32 Standard Cylinder SAI32X105
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke105 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa402 N346 N
0.7 MPa563 N—
Max (@1.0 MPa)82 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAI32 Standard Cylinder SAI32X105

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×105Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAI32 Standard Cylinder SAI32X105 Is Used

precision_manufacturing

Small Part Ejection

Provides the exact 105mm stroke needed to push small machined components out of a fixture with 402 N of force at 0.5 MPa.

conveyor_belt

Package Diverting

Actuates a short diverter arm on a packaging line where a standard 100mm stroke leaves a 5mm gap and 125mm is too long.

factory

Clamp Actuation

Drives a secondary clamping mechanism in an assembly cell, utilizing its 345 N pull force to securely hold light workpieces.

Is the Airtac SAI32 Standard Cylinder SAI32X105 the Right Cylinder?

Choose this 32mm bore when an application demands exactly 105mm of travel and 402 N of thrust at 0.5 MPa is sufficient. If your project requires slightly less force, there is no smaller bore in the SAI line, but stepping up to a 40mm bore increases the 0.5 MPa push force to 628 N. Because the stroke is 105mm, side-load stress on the rod bearing is minimal, though external guides should still be used for heavy off-center loads.

As a dimensionally interchangeable ISO 15552 cylinder, this model serves as a direct replacement for other 32mm bore profile cylinders on the market. It uses a G1/8 port, an M10x1.25 rod thread, and is compatible with standard FA, FB, LB, and TC mounting accessories. Note that a standard SAI cylinder relies on live air pressure to maintain its position; it will drift if air is lost. For positive holding without pressure, consider the SAIL or BSAI variants.

AirtacDistr lists every SAI32 order code with its price on one page at https://airtacdistr.com/products/airtac-sai32-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAI32 Standard Cylinder SAI32X105 FAQ

At 0.5 MPa, the SAI32X105 provides a push force of 402 N and a pull force of 345 N. If you increase the operating pressure to 0.7 MPa, the push force rises to 563 N.

Yes, the SAI32X105 is dimensionally interchangeable per ISO 15552. It shares the same 32mm bore mounting interface, G1/8 port, and M10x1.25 rod thread as other standard profile cylinders, allowing it to serve as a direct replacement.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAI32 Standard Cylinder SAI32X105

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAI32X105 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.