
The AirTAC SAI32 Standard Cylinder SAI32X125S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 125mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAI32X125-S is a double-acting ISO 15552 profile cylinder offering 402 N of push force at 0.5 MPa. The 125 mm stroke makes it well-suited for compact indexing and mid-length actuation tasks. Its extruded aluminum barrel design omits tie rods, providing a clean exterior that is dimensionally interchangeable with other ISO 15552 cylinders.
This specific configuration includes a magnetic piston for position detection and uses a standard carbon steel piston rod. The barrel features sensor grooves on both sides, allowing straightforward mounting of CMSE or DMSE reed switches. Fluid porting is PT tapered thread type, matching standard pneumatic layouts in localized machinery.
| Model | Airtac SAI32 Standard Cylinder SAI32X125S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 125 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Uses the 402 N push force at 0.5 MPa to reliably eject small molded components from a fixture during automated assembly.
Actuates a short 125 mm stroke diverting arm to route lightweight packages on a material handling line.
Drives a secondary clamping mechanism where the magnetic piston allows CMSE sensors to confirm clamp engagement.
Select this 32 mm bore when an application requires roughly 400 N of push force at 0.5 MPa, or up to 724 N at 0.9 MPa. If your mechanism needs less force, stepping down is not an option in the SAI series as 32 mm is the smallest bore; however, if you need significantly more thrust, consider the 40 mm bore which provides 628 N at 0.5 MPa. Because the stroke is 125 mm, side-load stress on the rod bearing remains low, but always ensure the load is axially aligned to prevent premature seal wear.
For direct replacements, match the 32 mm bore, 125 mm stroke, PT G1/8 port, and your required mounting accessory (such as LB foot or FA flange). Note that a standard SAI relies entirely on continuous air pressure to hold a load; if pneumatic supply drops, the piston will drift. For applications requiring fail-safe position holding without live pressure, integrate an external pilot-operated check valve or specify the SAIL locking variant.
AirtacDistr lists every SAI32 order code with its price on one page at https://airtacdistr.com/products/airtac-sai32-iso-air-cylinder
Quick checklist
This 32 mm bore cylinder generates 402 N of push force and 345 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 563 N.
Yes, the SAI32X125-S is dimensionally interchangeable per ISO 15552. You can use it as a direct replacement for other ISO 15552 profile cylinders with a 32 mm bore and 125 mm stroke, provided you match the G1/8 port and mounting interface.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.