
The AirTAC SAI32 Standard Cylinder SAI32X135 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 135mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAI32X135 is a double-acting ISO 15552 profile cylinder engineered to deliver 402 N of push force at 0.5 MPa. Its 135 mm stroke provides the exact mid-range extension needed for compact assembly fixtures and automated material handling tasks.
This unit features a standard carbon steel piston rod and utilizes a PT tapered port thread design. The extruded aluminum barrel incorporates dual sensor grooves, allowing for straightforward installation of CMSE or DMSE switches if position feedback is later required.
| Model | Airtac SAI32 Standard Cylinder SAI32X135 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 135 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×135 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for securing delicate electronic components during soldering or assembly, using its 402 N output at 0.5 MPa to hold parts firmly without causing damage.
Provides the quick 135 mm extension needed to push lightweight cardboard cartons from a main conveyor belt onto a secondary packaging line.
Operates small access gates and machine tool doors, cycling rapidly at speeds up to 800 mm/s to maintain high production throughput.
Select this 32 mm bore when an application requires precise movement within a tight footprint; stepping down is not an option as this is the smallest SAI size, but moving up to a 40 mm bore increases the 0.5 MPa push force to 628 N for heavier payloads. The 135 mm stroke falls below the 300 mm threshold, so side-load stress on the rod bearing is minimal.
As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard 32 mm bore, 135 mm stroke, PT port configuration with standard mounting accessories. Note that standard double-acting cylinders will drift if air pressure is lost; utilize the SAIL locking variant if the mechanism must hold a load safely during an emergency stop.
AirtacDistr lists every SAI32 order code with its price on one page at https://airtacdistr.com/products/airtac-sai32-iso-air-cylinder
Quick checklist
At a standard operating pressure of 0.5 MPa, this 32 mm bore cylinder generates 402 N of push force and 345 N of pull force. If pressure is increased to 0.7 MPa, the push force rises to 563 N.
Yes, the SAI32X135 is dimensionally interchangeable per ISO 15552. You can directly swap it with other 32 mm bore profile cylinders that share the same 135 mm stroke and PT port mounting dimensions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.