
The AirTAC SAI32 Standard Cylinder SAI32X145S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 145mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAI32X145-S is a double-acting ISO 15552 profile cylinder featuring a 32mm bore and a 145mm stroke. It delivers 402N of push force at 0.5 MPa, making it well-suited for compact automation tasks requiring precise mid-length linear movement. The extruded aluminum barrel design omits tie rods, providing a clean exterior that drops directly into standard ISO 15552 mounting footprints.
This specific configuration includes a magnet for use with CMSE and DMSE sensor switches, which ride neatly in the dual grooves machined into the barrel sides. It utilizes a standard carbon steel piston rod and features PT tapered port threads. For higher temperature environments, the standard TPU seals can be swapped for Viton (H) options.
| Model | Airtac SAI32 Standard Cylinder SAI32X145S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 145 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×145 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Uses the 145mm stroke to push finished lightweight plastic components out of a molding area reliably.
Actuates a short routing arm to sort small boxes on a conveyor line using 402N of push force.
Extends to close a secondary holding clamp on a machining fixture for small metal parts.
Selecting this 32mm bore is ideal when your application requires around 402N of push force at 0.5 MPa. If your load demands less energy, stepping down is an option, but moving up to a 40mm bore increases the push force to 628N at 0.5 MPa. Because this model features the -S magnet option, it is fully ready for position sensing without requiring external physical stops.
This cylinder uses a G1/8 port and an M10x1.25 rod thread. It provides adjustable air cushions at both ends to absorb kinetic energy, but note that these cushions only decelerate the piston and do not hold the load in place if air pressure is lost. For applications requiring positive locking under zero pressure, consider the SAIL variant or an external pilot check valve.
AirtacDistr lists every SAI32 order code with its price on one page at https://airtacdistr.com/products/airtac-sai32-iso-air-cylinder
Quick checklist
At 0.5 MPa, this cylinder provides 402N of push force and 345N of pull force. If you operate at 0.7 MPa, the push force increases to 563N.
Yes, the SAI32X145-S is dimensionally interchangeable per ISO 15552. You can drop it into existing mounts matching the 32mm bore standard, though you should verify the G1/8 port and M10x1.25 rod thread alignment.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.