
The AirTAC SAI32 Standard Cylinder SAI32X15 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 15mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAI32X15 is a double-acting ISO 15552 profile cylinder engineered for compact, high-cycle automation. Delivering a push force of 402 N at 0.5 MPa, this 32 mm bore unit with a 15 mm stroke excels in short-travel clamping and ejecting tasks. The extruded aluminum barrel design omits tie-rods, providing a clean exterior that drops directly into standard ISO 15552 mounting interfaces.
This configuration features a robust carbon steel piston rod and PT tapered port threads. Because a magnet is not specified, it operates without sensor tracks; add the -S suffix if you need CMSE or DMSE reed switch integration. For applications requiring higher temperature resistance, TPU seals can be swapped for Viton (H) or NBR (N) alternatives.
| Model | Airtac SAI32 Standard Cylinder SAI32X15 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for securing small electronic components during soldering or machining with its precise 15 mm travel.
Provides rapid 402 N ejection force at 0.5 MPa to push finished parts off an assembly line conveyor.
Delivers reliable double-acting actuation for mechanical diverter gates and small process valves.
Choose the SAI32X15 when a very short 15 mm stroke is sufficient, preventing unnecessary cylinder length. If your application requires slightly more reach, stepping up to a 25 mm stroke keeps the same 402 N force profile. For significantly heavier loads, the 40 mm bore provides 628 N at 0.5 MPa.
This cylinder relies on a 0.15-1.0 MPa air supply to maintain position. If pressure is lost, the piston will drift; use the SAIL variant with an air-released lock for fail-safe holding. Being dimensionally interchangeable per ISO 15552, it replaces equivalent profile cylinders using the G1/8 port, FA/FB flanges, and standard mounting dimensions.
AirtacDistr lists every SAI32 order code with its price on one page at https://airtacdistr.com/products/airtac-sai32-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SAI32X15 generates a push force of 402 N and a pull force of 345 N. At 0.7 MPa, the push force increases to 563 N.
Yes, the SAI32X15 is dimensionally interchangeable per ISO 15552. It matches standard mounting footprints and uses a G1/8 port, serving as a direct replacement for equivalent ISO profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.