
The AirTAC SAI32 Standard Cylinder SAI32X150S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 150mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAI32X150-S is a double-acting ISO 15552 profile cylinder designed for standardized mounting. It provides 402 N of push force at 0.5 MPa, making it well-suited for compact automation tasks requiring a 150 mm stroke. The extruded aluminum barrel eliminates tie-rods, resulting in a cleaner exterior that drops directly into existing ISO 15552 footprints.
This specific configuration includes a magnet for position sensing, riding smoothly in the dual sensor grooves machined into both sides of the barrel. It is wired for CMSE or DMSE switches and utilizes a standard carbon steel piston rod with PT tapered G1/8 ports. For higher temperature environments, the standard TPU seals can be swapped for Viton (H) options.
| Model | Airtac SAI32 Standard Cylinder SAI32X150S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Ideal for pushing lightweight machined components out of a fixture using its 402 N push force at 0.5 MPa.
Provides reliable 150 mm travel to actuate routing gates on a 32 mm bore packaging line.
Drives a 150 mm stroke to apply identification labels to incoming inventory at high cycling speeds.
When sizing this actuator, stepping up to a 40 mm bore increases the 0.5 MPa push force to 628 N, while dropping to a smaller profile cylinder is necessary if sub-32 mm dimensions are required. Because this unit features a 150 mm stroke, it remains compact enough to avoid severe rod-bearing bending, though external guides should still be used for heavy off-center loads.
As a standard double-acting cylinder, it requires continuous air pressure to hold a load; venting the system will cause the piston to drift. If your fixture must maintain position during a pressure loss, integrate an external pilot-operated check valve or select the SAIL variant with an integrated air-released lock. To match this exact unit for a replacement, specify a 32 mm bore, 150 mm stroke, PT G1/8 port, FA flange or LB foot mounting, and the -S magnet option.
AirtacDistr lists every SAI32 order code with its price on one page at https://airtacdistr.com/products/airtac-sai32-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 32 mm bore cylinder generates 402 N of push force and 345 N of pull force. If you increase the pressure to 0.7 MPa, the push force rises to 563 N.
Yes, the SAI32X150-S is dimensionally interchangeable per ISO 15552. You can drop it into existing mounting footprints like FA flanges or LB feet without modifying the plate geometry.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.