
The AirTAC SAI32 Standard Cylinder SAI32X160S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 160mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAI32X160-S is a double-acting ISO 15552 profile cylinder engineered for direct interchangeability with standardized mounting dimensions. Delivering a push force of 402 N at 0.5 MPa, this 32 mm bore unit is built for compact automation tasks requiring a 160 mm stroke. Its extruded aluminum barrel design eliminates tie-rods, providing a clean exterior that resists contamination.
This specific configuration includes a magnetic piston (-S) for seamless integration with CMSE or DMSE reed switches, fitting directly into the dual sensor grooves machined into the barrel profile. The piston rod utilizes a durable carbon steel construction, making it a robust choice for general-purpose industrial pneumatics.
| Model | Airtac SAI32 Standard Cylinder SAI32X160S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Provides 402 N of push force at 0.5 MPa to reliably eject lightweight molded components from machining fixtures.
The 160 mm stroke actuates diverter arms on packaging lines, with the magnetic piston enabling precise position confirmation.
Controls the flow of small parts into assembly stations, utilizing its PT G1/8 port for rapid pneumatic response.
Select this 32 mm bore when an application requires roughly 400 N of push force at 0.5 MPa, or step up to the 40 mm bore if you need 628 N to overcome higher friction. The 160 mm stroke provides adequate travel for typical part ejection and gating tasks. Because this model features a magnetic piston, it is ready for precise end-of-stroke detection using DMSE sensors.
For this 160 mm stroke, side loading is minimal, but always ensure rigid mounting using FA flanges or LB foot brackets to preserve rod bearing life. Note that the standard adjustable air cushions only decelerate the piston near the end caps; they do not hold a load. If your process requires the piston to stay fixed after air loss, integrate an external pilot-operated check valve or specify an SAIL locking variant.
AirtacDistr lists every SAI32 order code with its price on one page at https://airtacdistr.com/products/airtac-sai32-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 32 mm bore cylinder generates a push force of 402 N and a pull force of 345 N. If operated at 0.7 MPa, the push force increases to 563 N.
Yes, the SAI32X160-S is dimensionally interchangeable per ISO 15552. You can drop it into existing mounts designed for standard ISO 15552 profile cylinders without modifying the fixturing.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.