
The AirTAC SAI32 Standard Cylinder SAI32X165 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 165mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAI32X165 is a double-acting ISO 15552 profile cylinder engineered to deliver 402 N of push force at 0.5 MPa. Its 165 mm stroke provides the precise mid-range extension needed for compact assembly automation. The extruded aluminum barrel design omits tie rods, ensuring a clean exterior that drops directly into standardized ISO 15552 mounting footprints.
This specific configuration utilizes a durable carbon steel piston rod and features PT tapered port threads. Because it lacks a built-in magnet, this base variant is optimized for straightforward actuation without sensor feedback requirements. For high-temperature environments up to +70 C, the standard TPU seals handle routine operations flawlessly.
| Model | Airtac SAI32 Standard Cylinder SAI32X165 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Secures small machined parts during secondary milling operations with 402 N of reliable clamping force.
Extends 165 mm to push lightweight cardboard cartons from a main production line to a packaging lane.
Cycles material handling gates rapidly within the 30-800 mm/s speed range to control workflow on the floor.
Selecting this 32 mm bore is ideal when your application requires roughly 400 N of thrust, providing a step up from smaller actuators while remaining highly compact. If your project demands less force, stepping down reduces physical size and air consumption; conversely, moving to a 40 mm bore increases output to 628 N at 0.5 MPa for heavier payloads. Since the 165 mm stroke is well under the 300 mm threshold, rod-bearing bending is minimal, making it suitable for standard unguided loads.
When specifying a replacement, match the 32 mm bore, 165 mm stroke, PT G1/8 port, and your required mounting accessory like an LB foot or FA flange. Note that because this variant does not include the -S magnet option, it cannot host CMSE or DMSE reed sensors. Furthermore, standard air cushions only decelerate the piston near stroke ends; they will not hold a load vertically if air pressure is lost.
AirtacDistr lists every SAI32 order code with its price on one page at https://airtacdistr.com/products/airtac-sai32-iso-air-cylinder
Quick checklist
At 0.5 MPa operating pressure, this cylinder provides 402 N of push force and 345 N of pull force. If pressure is increased to 0.7 MPa, the push force rises to 563 N.
Yes, the SAI32X165 is dimensionally interchangeable per ISO 15552. You can drop it into existing mounts matching the 32 mm bore and 165 mm stroke, provided your setup uses the G1/8 port interface.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.