
The AirTAC SAID32 Double Rod Cylinder SAID32BX210 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 210mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SAID32X210 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 210mm stroke. Because the piston rod extends from both end covers, the effective annulus area is identical on extend and retract. This provides an equal 483N of force in both directions at 0.7 MPa, ensuring perfectly symmetric motion.
This configuration uses a SUS304 stainless steel rod (option B) for superior corrosion resistance and features PT tapered port threads. The rear rod extension is ideal for mounting a position flag or driving a secondary mechanism, while the extruded aluminum barrel includes sensor grooves on both sides for flexible switch placement.
| Model | Airtac SAID32 Double Rod Cylinder SAID32BX210 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø32 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 346 N | 346 N |
| 0.7 MPa | 484 N | — |
| Max (@1.0 MPa) | 70 kgf | |
Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Pushes and pulls a workpiece between two stations with identical 483N force, maintaining consistent cycle times without speed variations.
Uses the twin-rod geometry to guide a vertical load smoothly, preventing the mechanical twist common to single-rod actuators.
Mounts the primary tool on the front rod while using the rear rod extension to trigger an external limit switch or cam.
Select this 32mm bore when an application requires 483N of force both ways, or step down if less power is needed. A double-rod design is chosen over a single-rod SAI when you need dual-side guidance to prevent rotation or require actuation and sensing on opposite ends. Since this is a 210mm stroke, the unsupported rod length increases; use an external guide to prevent rod-bearing bending under heavy side loads.
This cylinder is dimensionally interchangeable per ISO 15552, making it a direct replacement for other ISO 15552 double-rod cylinders. To match this exact unit, specify the 32mm bore, 210mm stroke, PT port threads, SUS304 rod material, and no magnet. Note that a plain SAID does not hold position when air is lost; use a SAIL or BSAID for locking needs. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2.
AirtacDistr lists every SAID32 order code with its price on one page at https://airtacdistr.com/products/airtac-said32-double-rod-iso-cylinder
Quick checklist
Because the rod occupies both sides of the piston, the push and pull forces are equal. It delivers 345N at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa in both directions.
Yes, it shares standard ISO 15552 mounting dimensions and can serve as a direct replacement for other ISO 15552 double-rod profile cylinders, using the Basic, FA, LB, TC, FTC, TCM1, or TCM2 mounting styles.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.