verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SAI Series · ISO 15552 Cylinder

Airtac SAID32 Double Rod Cylinder SAID32BX65

The AirTAC SAID32 Double Rod Cylinder SAID32BX65 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø32mm bore and 65mm stroke, G1/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ32 mm
  • Stroke65 mm
  • Port sizeG1/8
  • Acting typeDouble acting
  • Rod threadM10×1.25
  • CushionAdjustable, 27 mm
$70.22 $78.65Save 10% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SAID32 stroke, mounting and version on one page All SAID32 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SAID32 Double Rod Cylinder SAID32BX65

The AirTAC SAID32X65 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 32mm bore and 65mm stroke. Because the SUS304 stainless steel rod exits both end covers, the annulus area is identical on each side. This yields exactly 345N of force in both extend and retract directions at 0.5 MPa, ensuring perfectly symmetric motion.

Beyond equal push and pull power, the twin-rod layout provides superior anti-rotation guidance for the load. The rear rod extension is ideal for mounting a position flag or driving a secondary mechanism. It utilizes PT tapered ports and includes adjustable air cushions at both ends to smoothly decelerate the piston near stroke limits.

Airtac SAID32 Double Rod Cylinder SAID32BX65 Technical Specifications

ModelAirtac SAID32 Double Rod Cylinder SAID32BX65
SeriesSAI ISO 15552 profile cylinder
Bore sizeØ32 mm
Stroke65 mm
Acting typeDouble acting
Port sizeG1/8
Rod threadM10×1.25
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 800 mm/s
CushionAdjustable, 27 mm
Max strokeUp to 1000 mm

Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.

Theoretical Output Force (Ø32mm)

PressurePush forcePull force
0.5 MPa346 N346 N
0.7 MPa484 N—
Max (@1.0 MPa)70 kgf

Double-rod model: the rod passes through the rear cover, so both piston faces lose rod area and push is shown at the annular-area value. Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SAID32 Double Rod Cylinder SAID32BX65

SAIISO 15552 profile-barrel cylinder series.
32Bore size in mm.
×65Stroke length in mm.
-SOptional built-in magnet for sensor position sensing.

Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.

Where the Airtac SAID32 Double Rod Cylinder SAID32BX65 Is Used

sync_alt

Symmetric Force Transfer

Drives a transfer carriage where the 345N extend and retract forces must be perfectly matched to avoid jerky movements during directional changes.

straighten

Anti-Rotation Slides

Guides a precision vertical slide using the twin SUS304 rods to prevent torsional deflection without needing external linear bearings.

settings_input_component

Rear-rod Position Flag

Mounts a physical cam on the rear rod extension to mechanically trip a limit switch at the end of the 65mm stroke.

Is the Airtac SAID32 Double Rod Cylinder SAID32BX65 the Right Cylinder?

Select this 32mm bore when an application demands identical 345N force both ways, stepping down from a 40mm bore (528N) if the extra thrust is unnecessary, or up from it if you require more than 345N. A double-rod design is chosen over a single-rod SAI when you need dual-side guidance to prevent rotation or require rear-rod sensing. This cylinder does not hold position unpowered; use a SAIL or BSAID variant if pneumatic locking is required.

As a dimensionally interchangeable ISO 15552 profile cylinder, it drops in for other standard double-rod units. Specify the 65mm stroke, PT port thread, and mounting from the SAID set: Basic, FA, LB, TC, FTC, TCM1, TCM2. Since it lacks a magnet, it cannot use CMSE or DMSE sensors.

AirtacDistr lists every SAID32 order code with its price on one page at https://airtacdistr.com/products/airtac-said32-double-rod-iso-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/NPT/G)
  • ✓ Magnet (-S) for sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SAID32 Double Rod Cylinder SAID32BX65 FAQ

It provides 345N of force at 0.5 MPa, 483N at 0.7 MPa, and 621N at 0.9 MPa. Because it is a double-rod cylinder, these pull-side figures apply equally to both the extend and retract directions.

Yes, it is dimensionally interchangeable per ISO 15552. However, the SAID series uses a specific mounting subset: Basic, FA, LB, TC, FTC, TCM1, and TCM2. It omits the FB, CA, CB, and CR brackets found on single-rod versions.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SAI Cylinders

Request a Quote for Airtac SAID32 Double Rod Cylinder SAID32BX65

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SAID32BX65 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.