Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-10
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-10 is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 60mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke60 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-10
The AirTAC SAIJ160X60-10 is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It provides a 50-60 mm usable travel window from its 60 mm nominal stroke, allowing you to dial back the end position by up to 10 mm during commissioning. In the 160 mm bore class, it delivers a robust 14074 N of push force at 0.7 MPa, making it ideal for heavy-duty pressing and clamping.
This variant uses a SUS420J2 stainless steel rod for superior corrosion resistance and features tapered PT ports. The extruded aluminum barrel includes sensor grooves on both sides for direct mounting of CMSE reed or DMSE electronic switches. Mounting options include Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR styles.
Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-10 Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-10 |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-10
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-10 Is Used
Heavy-Duty Press Fitting
Dial in the exact 50-60 mm travel window for pressing bearings, allowing fine-tuning of the end-stop without swapping cylinders.
Machine Setup Commissioning
Use the 10 mm rear adjustment to trim the retract position precisely during initial machine build and product changeover.
Short-Stroke Clamping
Leverage the 14074 N push force at 0.7 MPa to secure heavy workpieces, adjusting the clamping depth on the fly.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-10 the Right Cylinder?
Select this 160 mm bore cylinder when an application requires high force (10053 N push at 0.5 MPa) but only a short, finely-tuned stroke. If you need less force, stepping down to a 125 mm bore yields 6136 N at 0.5 MPa. The SAIJ160X60-10 is chosen over a fixed-stroke SAI when the exact end-of-travel position must be set on-site without adding external stops. For exact ISO 15552 replacement, match the 160 mm bore, 60 mm stroke, 10 mm adjustment, PT ports, and the specified mounting. Note that the rear adjuster acts only as a travel stop; it does not hold the load without live air. For position holding, consider an external rod lock or the SAIL lock series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-10 FAQ
At 0.7 MPa, this 160 mm bore cylinder provides 14074 N of push force and 9425 N of pull force. It can deliver up to 18095 N push at its maximum operating pressure of 0.9 MPa.
The rear adjuster screw acts as an external stopper that lets you shorten the effective stroke by up to 10 mm. This creates a 50-60 mm usable travel window for fine end-position tuning without changing the cylinder itself.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-10
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.