Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-30S
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-30S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 60mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke60 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-30S
The AirTAC SAIJ160X60-30-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster. It delivers a substantial 14074N push force at 0.7 MPa. The integrated -30 adjuster allows you to dial back the 60 mm nominal stroke, providing a precise 30-60 mm usable travel window for fine-tuning end positions at commissioning without adding external stops.
This SKU includes a SUS420J2 stainless steel rod (option A) for improved corrosion resistance and a magnet (-S) for position sensing. It works seamlessly with AirTAC CMSE reed and DMSE electronic sensors fitted into the dual-side barrel grooves. The adjuster functions strictly as a travel stop for deceleration, not a lock, so live air is required to hold the load.
Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-30S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-30S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-30S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-30S Is Used
Press Tonnage Calibration
Dial in the exact 30-60 mm travel window during machine commissioning to set precise pressing depths on high-force assembly lines.
Product Changeover Stops
Quickly adjust the rear stopper for different product sizes without physically replacing the cylinder or adding external mechanical stops.
Heavy Forming End-Position
Fine-tune the retraction end-point on large metal-forming equipment, using the built-in stop to absorb deceleration energy.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-30S the Right Cylinder?
Choose this 160 mm bore when you need high force in a compact footprint but require micro-adjustments on the retract end. If you need less force, stepping down to a 100 mm bore yields 5497N at 0.7 MPa. Select the adjustable SAIJ over a fixed SAI when product changeovers demand variable end-stops without physically swapping cylinders. For load-holding without continuous air pressure, select a SAIL or BSAI cylinder instead.
To match this ISO 15552 replacement, verify the 160 mm bore, 60 mm stroke, 30 mm adjustment range, PT tapered port thread, and the -S magnet. The SAIJ mounting set includes Basic, FA, LB, TC, FTC, TCM1, and TCM2, omitting the FB, CA, CB, and CR options.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-30S FAQ
The rear adjuster acts as an external stopper that lets you shorten the effective stroke by up to 30 mm. For this 60 mm stroke model, it creates a usable travel window of 30-60 mm, allowing precise end-position tuning without swapping the cylinder.
At 0.7 MPa operating pressure, this 160 mm bore cylinder provides a push force of 14074N and a pull force of 9425N. It can deliver up to 18095N push force at 0.9 MPa.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160AX60-30S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.