Airtac SAIJ160 Adjustable Cylinder SAIJ160AX600-10S
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160AX600-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 600mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke600 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160AX600-10S
The AirTAC SAIJ160X600-10-S is a double-acting ISO 15552 profile cylinder featuring a rear stroke adjuster that allows you to fine-tune the end position without adding external stops. With a nominal 600 mm stroke and a 10 mm adjustment range, it provides a usable travel window of 590 to 600 mm for precise commissioning. It delivers a robust 10053 N push force at 0.5 MPa and 14074 N at 0.7 MPa, making it suitable for heavy-duty positioning tasks.
This variant includes an SUS420J2 stainless steel rod for enhanced corrosion resistance and a magnet (-S) for use with AirTAC CMSE reed and DMSE solid-state sensors. It uses PT tapered ports and operates at speeds between 30 and 500 mm/s. The extruded aluminum barrel retains standard ISO 15552 mounting dimensions, while the adjustment screw functions purely as a travel stop to set the retract position, not as a lock to hold the load without air pressure.
Airtac SAIJ160 Adjustable Cylinder SAIJ160AX600-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160AX600-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160AX600-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160AX600-10S Is Used
Heavy Press Tuning
Dial in the exact 590-600 mm retract position on a large press during initial commissioning without machining external stop blocks.
Product Changeover
Quickly adjust the end-stop by up to 10 mm to accommodate slightly different workpiece heights on an automated assembly line.
Material Forming
Leverage the 10053 N push force at 0.5 MPa for heavy forming operations while using the rear screw to set precise material deflection limits.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160AX600-10S the Right Cylinder?
Select this 160 mm bore cylinder when an application requires high thrust combined with a variable end-stop for product changeovers. If your process requires less force, stepping down to a 125 mm bore yields 6136 N push force at 0.5 MPa; conversely, upgrading to a 200 mm bore provides 15708 N. The 10 mm adjustment window is ideal for dialing in exact retract positions during machine setup without swapping cylinders. Because the 600 mm stroke is long, an external guide is recommended to prevent rod side-loading and premature wear. For load-holding without live air pressure, use an external rod lock or select an AirTAC SAIL or BSAI cylinder, as the SAIJ adjuster only acts as a physical stop. When replacing an ISO 15552 cylinder, match the 160 mm bore, 600 mm stroke, PT ports, and the desired mounting set (Basic, FA, LB, TC, FTC, TCM1, or TCM2).
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160AX600-10S FAQ
At 0.5 MPa, this 160 mm bore cylinder provides 10053 N of push force and 9425 N of pull force. If you increase the operating pressure to 0.7 MPa, the push force rises to 14074 N.
The rear adjuster screw lets you trim the effective travel back by up to 10 mm from the 600 mm nominal stroke, creating a 590 to 600 mm usable window. It acts as a physical stop to set the end position and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160AX600-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.