Airtac SAIJ160 Adjustable Cylinder SAIJ160AX75-10S
The AirTAC Airtac SAIJ160 Adjustable Cylinder SAIJ160AX75-10S is a genuine double-acting ISO 15552 profile-barrel air cylinder with a Ø160mm bore and 75mm stroke, G3/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ160 mm
- Stroke75 mm
- Port sizeG3/4
- Acting typeDouble acting
- Rod threadM36×2
- CushionAdjustable, 50 mm
About the Airtac SAIJ160 Adjustable Cylinder SAIJ160AX75-10S
The AirTAC SAIJ160X75-10-S is a double-acting ISO 15552 profile cylinder equipped with a rear stroke adjuster, delivering massive thrust up to 18095N at 0.9 MPa. Its 75 mm nominal stroke can be precisely dialed back by up to 10 mm, creating a 65-75 mm usable travel window for exact end-position tuning during commissioning. This model includes a -S magnet for CMSE and DMSE sensors and uses a SUS420J2 stainless steel rod (code A) for enhanced corrosion resistance.
The rear adjusting screw acts purely as a mechanical stop to fine-tune the retract distance without requiring external stops or cylinder swaps. It operates within a 30-500 mm/s speed range, utilizing PT tapered ports (G3/4) and 50 mm variable air cushions at both ends. This adjustable-stroke design is dimensionally interchangeable per ISO 15552 and uses a reduced mounting set of Basic, FA, LB, TC, FTC, TCM1, and TCM2.
Airtac SAIJ160 Adjustable Cylinder SAIJ160AX75-10S Technical Specifications
| Model | Airtac SAIJ160 Adjustable Cylinder SAIJ160AX75-10S |
|---|---|
| Series | SAI ISO 15552 profile cylinder |
| Bore size | Ø160 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | G3/4 |
| Rod thread | M36×2 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Adjustable, 50 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SAI series datasheet and ISO 15552 dimensions. Confirm against the product label before installation. Port options: G (BSPP) / NPT.
Theoretical Output Force (Ø160mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 10053 N | 9425 N |
| 0.7 MPa | 14074 N | — |
| Max (@1.0 MPa) | 2050 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SAIJ160 Adjustable Cylinder SAIJ160AX75-10S
| SAI | ISO 15552 profile-barrel cylinder series. |
|---|---|
| 160 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related SAI-family variants: SAID (double rod), SAIJ (adjustable stroke), SAIL (with lock), SAIF (with valve), BSAI (enclasp / clamp-lock), and SAI-S with built-in magnet. Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B); seals: TPU (blank) / Viton H / NBR N.
Where the Airtac SAIJ160 Adjustable Cylinder SAIJ160AX75-10S Is Used
Heavy Press Tuning
Dial in the exact 65-75 mm end position during heavy press commissioning without adding external mechanical stops.
Product Changeover
Quickly adjust the retract distance on automated lines when switching between different product sizes or thicknesses.
Robotic End Effectors
Provides massive 18095N thrust with fine travel adjustment for large robotic grippers requiring precise positioning feedback.
Is the Airtac SAIJ160 Adjustable Cylinder SAIJ160AX75-10S the Right Cylinder?
Choose this 160 mm bore when a 125 mm bore (providing 11045N push at 0.9 MPa) cannot meet your force requirements, but you want to avoid stepping up to a 200 mm size. The adjustable 65-75 mm window is ideal for product changeovers on heavy machinery, allowing you to vary the end-stop on the fly instead of physically swapping a fixed-stroke SAI cylinder. To replace an ISO 15552 cylinder, match the 160 mm bore, 75 mm stroke, 10 mm adjustment, PT G3/4 port, and -S magnet.
Because the 40 mm rod and M36x2 thread provide substantial rigidity, this cylinder handles high side loads well, though long unsupported strokes still need an external guide. Remember that the rear adjuster is a travel stop, not a lock; the SAIJ does not hold loads without live air, so for fail-safe load holding you must look to the SAIL or BSAI series.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/NPT/G)
- ✓ Magnet (-S) for sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (FA/FB/CA/CB/LB/TC).
- check Installation by qualified personnel per AirTAC docs.
Airtac SAIJ160 Adjustable Cylinder SAIJ160AX75-10S FAQ
At 0.9 MPa operating pressure, this 160 mm bore cylinder provides a push force of 18095N and a pull force of 9425N. At 0.5 MPa, the push force is 10053N.
The rear adjuster screw lets you trim the 75 mm nominal stroke back by up to 10 mm, creating a 65-75 mm usable travel window. It functions as a mechanical stop for end-position tuning and does not lock the load without live air pressure.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC SAI Cylinders
Request a Quote for Airtac SAIJ160 Adjustable Cylinder SAIJ160AX75-10S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.