The AirTAC Airtac SC32 Standard Cylinder SC32X200TC is a genuine double-acting standard air cylinder with a Ø32mm bore and 200mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X200TC is a compact double-acting tie-rod cylinder delivering 402 N of push force at 0.5 MPa (724 N at the 0.9 MPa maximum operating pressure). Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration for light-to-medium automation tasks.
This model features a centre trunnion (TC) mount, supplied with the TCM1 bracket (F-SC32TC), allowing the cylinder to pivot freely for swinging or articulating loads. The 200 mm stroke is well within the 1000 mm maximum standard stroke for the 32 mm bore, making it a standard catalog item with PT1/8 ports.
| Model | Airtac SC32 Standard Cylinder SC32X200TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The centre trunnion mount allows the cylinder body to swing, making it ideal for actuating diverter gates on small conveyor lines where space is limited.
Provides 724 N of clamping force at 0.9 MPa for light staking, holding, or assembly fixtures, with adjustable cushioning to reduce cycle shock.
The pivoting TC mount and 200 mm stroke suit mechanical linkages in packaging machinery, where the cylinder must follow an arc during extension and retraction.
For higher force requirements, stepping up to the 40 mm bore provides 628 N at 0.5 MPa. When replacing, match all five key points: 32 mm bore, 200 mm stroke, PT port thread, centre trunnion (TC) mounting, and the absence of a magnet. The SC is a tie-rod cylinder and is not dimensionally interchangeable with ISO 15552 profiles; it is shorter in overall length.
For this 200 mm stroke, ensure the load is guided externally if side forces are present, as the 12 mm rod can be vulnerable to bending under off-axis loads.
Quick checklist
At the standard 0.5 MPa operating pressure, the cylinder provides 402 N pushing force and 345 N pulling force. At the maximum operating pressure of 0.9 MPa, the pushing force increases to 724 N.
No. The AirTAC SC series is a tie-rod cylinder with a shorter overall body length than an ISO 15552 profile cylinder. It is not dimensionally interchangeable. Only replace with another AirTAC SC32 tie-rod cylinder matching the bore, stroke, PT ports, and TC mount.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.