The AirTAC Airtac SC32 Standard Cylinder SC32X275S is a genuine double-acting standard air cylinder with a Ø32mm bore and 275mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X275S is a double-acting pneumatic cylinder delivering 402 N of push force at 0.5 MPa, scaling up to 724 N at the maximum operating pressure of 0.9 MPa. Its 12 mm diameter piston rod and 21 mm adjustable air cushion provide reliable deceleration for mid-stroke positioning tasks.
This model includes a built-in magnet (-S suffix), allowing direct mounting of CMSG, DMSG, or EMSG reed and solid-state sensors on the barrel for non-contact position feedback. The 275 mm stroke, combined with the compact 140 mm body length, makes it a space-efficient choice for sorting gates and small transfer mechanisms.
| Model | Airtac SC32 Standard Cylinder SC32X275S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The built-in magnet allows CMSG/DMSG sensors to confirm gate position, ensuring precise product diversion on small conveyor lines.
Compact 32 mm bore and 275 mm stroke fit tight lab automation spaces, with TPU seals handling standard -20 to +70 °C cleanroom environments.
Delivers a crisp 402 N push at standard line pressure to eject lightweight parts from an assembly track, with adjustable cushioning to reduce impact noise.
Select the SC32X275S when your application requires a compact, sensor-ready actuator with up to 724 N of force. If you need higher force, step up to the SC40 series, which provides 628 N at 0.5 MPa. For strokes beyond 1000 mm, the 32 mm bore reaches its maximum standard limit.
To ensure a correct replacement, match five key points: 32 mm bore, 275 mm stroke, PT1/8 port thread, the basic mounting configuration, and the integrated magnet (-S) for sensor compatibility. For strokes over 300 mm, consider an external guide rail to protect the 12 mm rod from side-load bending.
Quick checklist
At 0.5 MPa, the cylinder produces 402 N pushing force and 345 N pulling force. At the maximum operating pressure of 0.9 MPa, the pushing force reaches 724 N.
Yes. The -S suffix denotes a built-in magnet, making the SC32X275S compatible with AirTAC CMSG, DMSG, and EMSG sensors that clamp directly onto the tie-rod barrel.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.