The AirTAC Airtac SC32 Standard Cylinder SC32X300TC is a genuine double-acting standard air cylinder with a Ø32mm bore and 300mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The AirTAC SC32X300TC is a double-acting tie-rod cylinder delivering 402 N push and 345 N pull at 0.5 MPa, rising to 724 N at the maximum operating pressure of 0.9 MPa. With a 12 mm piston rod and PT1/8 ports, this 32 mm bore unit is built for compact pneumatic tasks requiring a 300 mm working stroke.
This model is supplied with a TC centre trunnion mount (F-SC32TC), allowing the cylinder body to pivot during operation, which is essential for swinging or oscillating loads. The adjustable air cushion at each end decelerates the piston smoothly over a 21 mm distance, reducing end-of-stroke impact and noise.
| Model | Airtac SC32 Standard Cylinder SC32X300TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 300 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 300 mm stroke and compact 32 mm bore are ideal for diverting gates on light-duty conveyors, where the 402 N push force easily handles small packages and the trunnion mount allows the gate to swing.
Delivers precise, repeatable clamping force for holding small components during assembly or machining, with the adjustable cushion protecting delicate parts from impact damage.
A reliable choice for R&D and lab test fixtures requiring a 300 mm linear motion. The centre trunnion provides flexible mounting, and the 724 N max force handles moderate cycling loads.
For applications needing more force, stepping up to the SC40 bore provides 628 N push at 0.5 MPa, while the SC32 remains ideal for lighter, high-speed actuation. The 300 mm stroke is within the standard range for this bore, but when mounting horizontally with a side load, an external guide rail is recommended to prevent rod bearing wear and bending.
To guarantee a correct replacement, match five key points: 32 mm bore, 300 mm stroke, PT1/8 port thread, TC centre trunnion mounting, and the absence of a built-in magnet. This cylinder is not dimensionally interchangeable with ISO 15552 profiles, as the SC tie-rod design is shorter overall.
Quick checklist
At the standard operating pressure of 0.5 MPa, the cylinder provides 402 N of push force and 345 N of pull force. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N. The theoretical maximum force at 1.0 MPa is 82 kgf.
No. The SC32X300TC is a double-acting cylinder and will not hold its position or load when air pressure is exhausted or the directional valve is centred. If load holding is required, you must add a pilot-operated check valve or an external mechanical rod lock.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.