The AirTAC Airtac SC32 Standard Cylinder SC32X350S is a genuine double-acting standard air cylinder with a Ø32mm bore and 350mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X350S is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, delivering 402 N of push force at 0.5 MPa and up to 724 N at the 0.9 MPa maximum operating pressure. Its 32 mm bore and 350 mm stroke suit mid-reach linear actuation tasks where space is limited but sensor feedback is required.
This model includes a built-in magnet (-S suffix), allowing CMSG, DMSG, or EMSG reed and solid-state sensors to be mounted directly on the barrel for precise end-of-stroke or intermediate position sensing. The cylinder uses a 12 mm diameter piston rod with an M10x1.25 thread, PT1/8 ports, and an adjustable air cushion of 21 mm to decelerate the piston smoothly.
| Model | Airtac SC32 Standard Cylinder SC32X350S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The 350 mm stroke and built-in magnet make this cylinder ideal for diverting cartons on a conveyor, with sensors confirming gate position at each cycle.
Provides consistent 402 N clamping force for electronic component testing, with magnetic sensors verifying full extension before the test sequence begins.
Uses the full 350 mm stroke to push finished parts off a molding machine platen, with sensor feedback ensuring the rod retracts fully before the next cycle.
Select the SC32X350S when your application needs a compact 32 mm bore with a 350 mm reach and integrated position sensing. If the 402 N push force at 0.5 MPa is marginal, stepping up to the SC40 bore provides 628 N at the same pressure. For strokes of 300 mm or more, evaluate side loads carefully—the 12 mm rod may require an external guide or a guided cylinder to prevent rod bending under lateral force.
For drop-in replacement, match five points: bore (32 mm), stroke (350 mm), PT1/8 port thread, the built-in magnet (-S), and the basic mounting style. This cylinder is a genuine AirTAC tie-rod unit; it is not dimensionally interchangeable with ISO 15552 profile cylinders.
Quick checklist
At 0.5 MPa the cylinder pushes with 402 N and pulls with 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N. The theoretical maximum at 1.0 MPa is 82 kgf.
Yes. The -S suffix means a magnet is built into the piston. You can clamp CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the barrel to detect piston position without any modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.