The AirTAC Airtac SC32 Standard Cylinder SC32X365S is a genuine double-acting standard air cylinder with a Ø32mm bore and 365mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X365S is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, combining a 32 mm bore with a 365 mm stroke. At 0.5 MPa it generates 402 N pushing force, and the 12 mm diameter piston rod provides reliable linear motion for medium-duty tasks.
This model includes the -S suffix, meaning a built-in magnet is fitted directly to the piston. This allows CMSG, DMSG, or EMSG reed and solid-state sensors to be clamped onto the barrel for non-contact position sensing. The total extended body length is approximately 505 mm, and the adjustable air cushion (21 mm) helps decelerate the load quietly at end of stroke.
| Model | Airtac SC32 Standard Cylinder SC32X365S |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 365 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×365 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
The built-in magnet and 365 mm stroke suit pick-and-place modules where end-of-stroke confirmation via DMSG sensors is required for cycle accuracy.
With 402 N of push force at 0.5 MPa, this cylinder handles light package diverting or sorting gates on belt conveyors, with sensors verifying gate position.
The compact 32 mm bore and clean, sensor-ready design fit automated lab equipment for sample handling or tray positioning where stroke feedback is essential.
Choose the SC32X365S when your application needs a compact 32 mm bore with a moderate 365 mm reach and integrated sensor capability. If you require higher force, stepping up to the SC40 series provides 628 N push at 0.5 MPa. For strokes over 300 mm, be mindful of side loads: the 12 mm rod can bend under lateral force, so always guide the load externally or use a guided cylinder if off-axis forces are present.
To ensure a correct replacement, match five key points: the 32 mm bore, 365 mm stroke, PT1/8 port thread, the built-in magnet (-S), and the basic mounting style. This tie-rod cylinder is not dimensionally interchangeable with ISO 15552 profiles.
Quick checklist
At the standard operating pressure of 0.5 MPa, the cylinder delivers 402 N pushing force and 345 N pulling force. At the maximum operating pressure of 0.9 MPa, the pushing force reaches 724 N.
Yes. The -S suffix indicates a built-in magnet, so you can clamp AirTAC CMSG (reed) or DMSG/EMSG (solid-state) sensors directly onto the tie-rod barrel to detect piston position without additional brackets.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.