The AirTAC Airtac SC32 Standard Cylinder SC32X650TC is a genuine double-acting standard air cylinder with a Ø32mm bore and 650mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X650TC is a double-acting pneumatic cylinder from the AirTAC SC tie-rod series, delivering 402 N of push force at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa. With a 32 mm bore and a 650 mm stroke, this model is well-suited for medium-reach linear tasks where the compact 140 mm body length helps fit into constrained machine frames.
This configuration includes a centre trunnion (TC) mount, supplied with the TCM1 bracket (F-SC32TC), allowing the cylinder to pivot during operation to accommodate swinging or arcing loads. The 12 mm diameter rod with M10x1.25 threads and PT1/8 ports provides a reliable connection, while the 21 mm adjustable air cushion at each end decelerates the piston smoothly.
| Model | Airtac SC32 Standard Cylinder SC32X650TC |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 650 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×650 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
Operates a pivoting diverter arm on a conveyor line, using the centre trunnion to swing through an arc without binding.
Provides a 402 N clamping force at standard line pressure, ideal for holding parts in a welding or assembly fixture that needs to pivot for loading.
Controls a pivoting linkage or chute on a compact agricultural machine, where the 650 mm stroke provides the necessary reach.
Select the SC32X650TC for applications needing a 32 mm bore with a 650 mm stroke and a pivoting mount. The centre trunnion is ideal when the cylinder must swing, using the supplied TCM1 bracket. For higher force, the SC40 series steps up to 628 N at 0.5 MPa. When replacing, match bore, stroke, PT ports, the TC mount, and the absence of a magnet. At this 650 mm stroke, ensure the rod is guided externally if side loads are present, as the 12 mm rod can be vulnerable to bending under off-axis forces.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force increases to 724 N.
Yes, the 'TC' suffix indicates a centre trunnion mount, and it is supplied with the TCM1 trunnion bracket (order code F-SC32TC). The cylinder body is designed to pivot on this bracket.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.