The AirTAC Airtac SC32 Standard Cylinder SC32X800SH is a genuine double-acting standard air cylinder with a Ø32mm bore and 800mm stroke, PT1/8 air ports and adjustable end cushioning. It is used for push, pull, lift and clamp motion in industrial automation.
The SC32X800SH is a 32 mm bore, 800 mm stroke double-acting pneumatic cylinder from the AirTAC SC tie-rod series. It delivers 402 N of push force at 0.5 MPa and up to 724 N at the maximum operating pressure of 0.9 MPa, driven by a 12 mm diameter piston rod.
This model includes a built-in magnet (-S) for mounting CMSG/DMSG/EMSG sensors directly on the barrel, and Viton (FKM) seals (-H) that shift the operating temperature range to 0 to +150 °C, making it suitable for hot environments. The body length A is 140 mm, and the adjustable air cushion at each end is 21 mm long.
| Model | Airtac SC32 Standard Cylinder SC32X800SH |
|---|---|
| Series | SC standard tie-rod cylinder |
| Bore size | Ø32 mm |
| Stroke | 800 mm |
| Acting type | Double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 21 mm |
| Max stroke | Up to 1000 mm |
Specifications follow the official AirTAC SC series datasheet. Operating pressure 0.15–1.0 MPa, proof pressure 1.5 MPa, temperature −20 to +70 °C. Confirm against the product label before installation. Thread options: PT (standard) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (approx.) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SC | Standard tie-rod cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×800 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Related variants: SCD (double rod), SCJ (adjustable stroke), SCT (multi-position). Seals: TPU standard / H = Viton / N = NBR. Thread: blank = PT, G = G thread.
With Viton seals rated to 150°C, this cylinder operates reliably in autoclaves, drying ovens, and sterilisation equipment where standard seals would fail.
The built-in magnet allows direct mounting of reed or solid-state sensors for precise end-of-stroke detection in high-speed sorting and diverting conveyors.
The 800 mm stroke combined with 724 N of thrust at 0.9 MPa makes it effective for ejecting lightweight parts from fixtures or pushing components through a heating tunnel.
Choose the SC32 bore for light pneumatic tasks; if you need more force, the SC40 delivers 628 N at 0.5 MPa. For this 800 mm stroke, the 12 mm rod is slender—avoid side loading or use an external guide to prevent rod bending. When replacing, match bore, stroke, PT port thread, the -S magnet for sensor compatibility, and the Viton seal for high-temperature operation.
Quick checklist
At 0.5 MPa, the push force is 402 N and the pull force is 345 N. At the maximum operating pressure of 0.9 MPa, the push force reaches 724 N.
Yes. The -H suffix designates Viton (FKM) seals, which are rated for continuous operation in ambient temperatures from 0 to +150 °C, unlike the standard TPU seals which are limited to -20 to +70 °C.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.