Airtac SE100 Standard Air Cylinder SE100BX950S
The AirTAC Airtac SE100 Standard Air Cylinder SE100BX950S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 950mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ100 mm
- Stroke950 mm
- Port sizePT1/2
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE100 Standard Air Cylinder SE100BX950S
The AirTAC SE100BX950S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a robust 3927 N push at 0.5 MPa, scaling to 5497 N at 0.7 MPa. The 950 mm stroke is a non-standard made-to-order length, maximizing reach for large-scale machinery. Equipped with a SUS304 stainless steel rod, it is purpose-built for corrosive environments and washdown duty.
The extruded aluminum barrel lacks external tie rods, yielding a compact footprint that mounts flush against frames while resisting corrosion. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, softening hard impacts at high cycling speeds. The integrated magnet supports CMSE reed and DMSE electronic sensors for precise position detection along the extended travel path.
Airtac SE100 Standard Air Cylinder SE100BX950S Technical Specifications
| Model | Airtac SE100 Standard Air Cylinder SE100BX950S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø100 mm |
| Stroke | 950 mm |
| Acting type | Double acting |
| Port size | PT1/2 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE100 Standard Air Cylinder SE100BX950S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 100 | Bore size in mm. |
| ×950 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE100 Standard Air Cylinder SE100BX950S Is Used
Automotive Body Welding
Drives large welding fixtures requiring a 950 mm reach, utilizing the 5497 N push force to clamp heavy steel panels securely in washdown-prone robotic cells.
Lumber Mill Positioning
Actuates large cutting guides over extended travel, where the SUS304 stainless rod resists high-moisture wood processing environments.
Palletizer Transfer
Shifts heavy product diverters across wide conveyor belts, relying on the field-adjustable cushioning to decelerate 801 kgf loads smoothly at stroke ends.
Is the Airtac SE100 Standard Air Cylinder SE100BX950S the Right Cylinder?
This 100 mm bore cylinder provides 3927 N of push force at 0.5 MPa. If your application requires less thrust, stepping down to the 80 mm bore yields 2513 N; conversely, scaling up to the 125 mm bore provides 6136 N. Because the 950 mm stroke is non-standard, expect a made-to-order lead time. The PT1/2 port and M20x1.5 rod thread handle high flow and heavy loads.
At 950 mm of travel, the unsupported rod mass and external side loads can induce significant bending stress on the rod bearing. An external guide mechanism is strongly recommended to prevent premature seal wear. Note that this cylinder drifts when air pressure is lost or the valve is centered; it cannot hold a load pneumatically. For position-holding safety, consider the BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE100 Standard Air Cylinder SE100BX950S FAQ
At 0.5 MPa, the push force is 3927 N and the pull force is 3681 N. At 0.7 MPa, the push force is 5497 N. The maximum push force is 801 kgf at 1.0 MPa. Operating pressure ranges from 0.15-1.0 MPa, with a speed of 30-800 mm/s.
Yes, the extruded profile barrel is dimensionally interchangeable per ISO 15552, allowing it to drop into existing mounting hardware without modifications. The built-in magnet works with AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE100 Standard Air Cylinder SE100BX950S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.