verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE100 Standard Air Cylinder SE100X100CA

The AirTAC SE100 Standard Air Cylinder SE100X100CA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 100mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke100 mm
  • Port sizePT1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$164.00 $171.50Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE100 stroke, mounting and version on one page All SE100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE100 Standard Air Cylinder SE100X100CA

The AirTAC SE100X100CA is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. Operating at 0.5 MPa, it generates 3927 N of push force and 3681 N of pull force, scaling up to a maximum push of 801 kgf at 1.0 MPa. The extruded aluminum barrel design eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.

This specific SKU includes a CA single clevis mounting accessory for pivoting articulation and uses a standard PT1/2 port. Because this configuration lacks the -S magnet suffix, it is built without an internal magnetic ring and cannot host CMSE or DMSE position sensors. Field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard mechanical impacts without relying on fixed rubber bumpers.

Airtac SE100 Standard Air Cylinder SE100X100CA Technical Specifications

ModelAirtac SE100 Standard Air Cylinder SE100X100CA
SeriesSE ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke100 mm
Acting typeDouble acting
Port sizePT1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N—
Max (@1.0 MPa)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE100 Standard Air Cylinder SE100X100CA

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
100Bore size in mm.
×100Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE100 Standard Air Cylinder SE100X100CA Is Used

precision_manufacturing

Injection Mold Platen Ejection

Provides the robust 3927 N push force required to eject heavy plastic parts from injection molding platens, utilizing the CA clevis to accommodate angular platen movement.

factory

Heavy Stamping Press Feed

Drives heavy-gauge metal coil feeds into a stamping press, where the 100 mm bore output and adjustable cushioning absorb the sudden high-mass directional shifts.

package_2

Pallet Dispenser Pusher

Indexes empty wooden pallets into high-speed packaging lines, relying on the 3681 N retract force to pull the heavy carriage back without mechanical binding.

Is the Airtac SE100 Standard Air Cylinder SE100X100CA the Right Cylinder?

Selecting this 100 mm bore makes sense when your application requires substantial thrust, such as the 3927 N push force delivered at 0.5 MPa. If you need to step down to save air and footprint, the 80 mm bore provides 2513 N of push at 0.5 MPa. Conversely, if you need to scale up to the maximum 6136 N push, the 125 mm bore is your next option. This model features a CA single clevis mount, ideal for pivoting loads.

Keep in mind that a plain SE cylinder does not hold its position or lock a load when air pressure is lost or exhausted; the piston will drift. If your pivoting mechanism requires secure holding without live pressure, you must integrate an external pilot-operated check valve or step up to the AirTAC BSE rod-lock variant. Furthermore, this SKU is built without a sensor magnet, so if your cycle requires position feedback, you must specify the -S option to utilize CMSE reed or DMSE electronic switches.

AirtacDistr lists every SE100 order code with its price on one page at https://airtacdistr.com/products/airtac-se100-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE100 Standard Air Cylinder SE100X100CA FAQ

At 0.5 MPa, this 100 mm bore cylinder outputs 3927 N of push force and 3681 N of pull force. At 0.7 MPa, the push force increases to 5497 N. The maximum push capacity is 801 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.

Yes, it is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 profile cylinders using the same CA mounting footprint. This specific SKU lacks the -S magnet, so it cannot support CMSE or DMSE sensors without modifying the build code.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE100 Standard Air Cylinder SE100X100CA

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE100X100CA and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.