verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

AirTAC SE100X80S ISO 15552 Cylinder | FTC Mount

The AirTAC SE100X80S ISO 15552 Cylinder | FTC Mount is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø100mm bore and 80mm stroke, PT1/2 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ100 mm
  • Stroke80 mm
  • Port sizePT1/2
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$192.56 Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE100 stroke, mounting and version on one page All SE100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the AirTAC SE100X80S ISO 15552 Cylinder | FTC Mount

The AirTAC SE100X80SFTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty motion. Operating at 0.5 MPa, it generates 3927 N of push force and 3681 N of pull force, scaling to a maximum of 801 kgf at 1.0 MPa. The extruded aluminum barrel design omits external tie rods, yielding a smooth, compact body that resists corrosion and mounts flush against machine frames.

This specific configuration includes a built-in magnet for CMSE reed and DMSE electronic position sensing, paired with an FTC center trunnion mounting style. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration, protecting tooling and extending mechanical life during high-speed 30-800 mm/s cycles.

AirTAC SE100X80S ISO 15552 Cylinder | FTC Mount Technical Specifications

ModelAirTAC SE100X80S ISO 15552 Cylinder | FTC Mount
SeriesSE ISO 15552 profile cylinder
Bore sizeØ100 mm
Stroke80 mm
Acting typeDouble acting
Port sizePT1/2
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N—
Max (@1.0 MPa)801 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: AirTAC SE100X80S ISO 15552 Cylinder | FTC Mount

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
100Bore size in mm.
×80Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the AirTAC SE100X80S ISO 15552 Cylinder | FTC Mount Is Used

packaging

Palletizer Flap Control

With 3927 N of push force at 0.5 MPa, this 100 mm bore cylinder drives heavy flap diverter arms on high-speed palletizing lines, using the FTC trunnion to pivot smoothly under dynamic loads.

precision_manufacturing

Injection Mold Ejection

The 80 mm stroke and DMSE electronic sensor compatibility provide precise, repeatable ejection of dense plastic injection molded parts, while the adjustable cushion softens the 3927 N impact at stroke end.

factory

Hydraulic Press Transfer

Moving heavy steel blanks between hydraulic press stations relies on the 100 mm bore's 801 kgf max force capacity, where the no-tie-rod profile prevents grease and debris buildup in dirty environments.

Is the AirTAC SE100X80S ISO 15552 Cylinder | FTC Mount the Right Cylinder?

Delivering 3927 N push at 0.5 MPa, this 100 mm bore is a robust choice for high-load tasks. If your application requires less force, the 80 mm bore provides 2513 N of push, while stepping up to the 125 mm bore yields 6136 N for heavier displacement. The integrated FTC trunnion mount is ideal for pivot-driven mechanisms, but remember that a plain SE cylinder will drift if air pressure is lost; for position holding without live pressure, consider the BSE rod lock variant. The PT1/2 port and M20x1.5 rod thread handle substantial airflow and structural loads. At an 80 mm stroke, side-load stress is minimal, though any pivot mount still benefits from a well-aligned external guide to prevent bearing wear.

AirtacDistr lists every SE100 order code with its price on one page at https://airtacdistr.com/products/airtac-se100-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

AirTAC SE100X80S ISO 15552 Cylinder | FTC Mount FAQ

This 100 mm bore cylinder features a PT1/2 port and generates 3927 N push / 3681 N pull at 0.5 MPa, 5497 N push at 0.7 MPa, and reaches a maximum push force of 801 kgf at 1.0 MPa.

Yes, the SE series is dimensionally interchangeable per ISO 15552 standards, allowing it to direct replace other brands' profile cylinders using existing FTC mounting hardware without requiring a new footprint.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for AirTAC SE100X80S ISO 15552 Cylinder | FTC Mount

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE100X80SFTC and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.