
The AirTAC SE80 Standard Cylinder SE80AX140 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 140mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE80AX140 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 2513 N push force at 0.5 MPa. Featuring an 80 mm bore and 140 mm stroke, it utilizes a SUS420J2 stainless steel piston rod (code A) specifically selected for corrosive environments and washdown duty. The square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush against machine frames while naturally resisting mechanical corrosion.
This model integrates field-adjustable pneumatic cushioning at both ends, allowing technicians to tune end-of-stroke deceleration via a screw rather than relying on a fixed bumper. Operating at speeds of 30-800 mm/s via a PT3/8 port, this SKU is built without a position sensor magnet. If your application requires position feedback, you would need the -S magnet variant to utilize AirTAC CMSE reed or DMSE electronic switches.
| Model | Airtac SE80 Standard Cylinder SE80AX140 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 140 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×140 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Pushes raw bar stock into the lathe spindle with 2513 N of force, relying on the SUS420J2 stainless rod to withstand intermittent coolant spray and washdown cycles.
Actuates a routing gate at 30-800 mm/s to sort filled beverage bottles on a packaging conveyor, using the adjustable end cushions to prevent hard stops at high speeds.
Drives the knockout pins on a 140 mm stroke to eject plastic parts from the mold cavity, benefiting from the tie-rod-free extruded profile for tight mold-base clearances.
Selecting this 80 mm bore makes sense when your application requires the 2513 N push at 0.5 MPa (or 3518 N at 0.7 MPa) that this cylinder provides. If your load is lighter, stepping down to the 63 mm bore yields 1559 N of push force, saving physical space. Conversely, if your mechanism demands more power, stepping up to the 100 mm bore provides 3927 N of push. Because this is a standard double-acting cylinder, it will not hold a load in place if air pressure is lost or the valve centers; the piston will drift. For position holding without live pressure, consider the BSE rod-lock variant. As a true ISO 15552 profile cylinder, it serves as a dimensionally interchangeable direct replacement for other ISO 15552 cylinders, utilizing standard mounting hardware like FA front flanges or TC trunnions.
AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder
Quick checklist
At 0.5 MPa, the SE80AX140 delivers 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It features a PT3/8 port, a 25 mm diameter rod, and an M20x1.5 rod-end thread.
Yes. The SE80AX140 is built to the ISO 15552 / VDMA 24562 standard, meaning its mounting interface and physical dimensions are interchangeable with other ISO 15552 profile cylinders. You can use it as a direct retrofit without altering your existing mounting footprint or accessory hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.