
The AirTAC SE80 Standard Cylinder SE80AX15 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 15mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE80AX15 is a double-acting single-rod ISO 15552 profile cylinder engineered for high-force pneumatics, delivering 2513 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machinery spaces. The SUS420J2 stainless steel rod (code A) directly elevates corrosion resistance for washdown or high-moisture environments.
Unlike fixed rubber bumpers, this unit incorporates a field-adjustable air cushion at both ends, allowing technicians to tune end-of-stroke deceleration via a screw to soften hard mechanical impacts. This specific SKU lacks a built-in position-sensing magnet, meaning it operates blind to electronic feedback unless external limits are applied.
| Model | Airtac SE80 Standard Cylinder SE80AX15 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 2513 N extend force at 0.5 MPa to positively eject stamped metal parts from tight die cavities, leveraging the short 15 mm stroke for rapid high-frequency cycling.
Secures capped bottles on a high-speed beverage line; the SUS420J2 stainless rod withstands frequent washdowns and chemical splash without pitting.
Provides localized holding pressure on small injection mold sub-platens, where the adjustable air cushion absorbs the rapid shock of the 25 mm rod retracting at full speed.
Choosing this 80 mm bore depends on needing substantial thrust without jumping to the 100 mm class (3927 N push at 0.5 MPa); if 2513 N is excessive, dropping to the 63 mm bore yields 1559 N. The 15 mm stroke is highly compact, keeping the assembly tight while utilizing a PT3/8 port and an M20x1.5 rod thread for robust fluid and mechanical connections. Because this is a standard double-acting cylinder, it cannot hold a load if air pressure is lost or the valve centers—piston drift will occur, requiring a BSE rod lock for fail-safe positioning. The SUS420J2 rod material is specifically selected here for corrosive duty where standard carbon steel would pit.
AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and hardware interface of other ISO 15552 profile cylinders. However, note this specific SKU lacks a built-in magnet, so it will not trigger CMSE or DMSE position sensors without modification.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.