verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE80 Standard Cylinder SE80AX150

The AirTAC SE80 Standard Cylinder SE80AX150 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke150 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$166.79 $174.29Save 4% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE80 stroke, mounting and version on one page All SE80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE80 Standard Cylinder SE80AX150

The AirTAC SE80AX150 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 2513 N push force at 0.5 MPa. It features an 80 mm bore, a 150 mm stroke, and a SUS420J2 stainless steel piston rod designed specifically for corrosive or washdown environments.

Unlike traditional tie-rod actuators, this model utilizes a square extruded aluminum barrel without external tie rods, yielding a compact footprint that mounts flush on machinery while resisting external corrosion. The actuator incorporates field-adjustable air cushioning at both ends to decelerate the payload smoothly, and because this specific SKU lacks the -S magnet code, it is not equipped for CMSE or DMSE position sensing out of the box.

Airtac SE80 Standard Cylinder SE80AX150 Technical Specifications

ModelAirtac SE80 Standard Cylinder SE80AX150
SeriesSE ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke150 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2513 N2268 N
0.7 MPa3519 N—
Max (@1.0 MPa)513 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE80 Standard Cylinder SE80AX150

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
80Bore size in mm.
×150Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE80 Standard Cylinder SE80AX150 Is Used

packaging

Palletizer Flap Control

Drives the heavy pneumatic flap mechanisms on automated palletizing lines, where the 2513 N push force reliably diverts filled corrugated boxes onto outbound conveyors.

science

Washdown Diverter

Leverages the SUS420J2 stainless steel rod to actuate fluid diverter valves in food-processing plants, enduring daily high-pressure caustic washdowns without surface degradation.

factory

Injection Mold Clamp

Provides the secondary clamping pressure on large injection molding machines, using its 150 mm stroke to secure heavy mold halves during the low-pressure closing phase.

Is the Airtac SE80 Standard Cylinder SE80AX150 the Right Cylinder?

Delivering 2513 N of thrust at 0.5 MPa, this 80 mm bore actuator sits perfectly between the 63 mm class (1559 N push) and the 100 mm class (3927 N push), allowing you to scale power up or down based on your dynamic load requirements. It utilizes a PT3/8 port and an M20x1.5 rod-end thread. If your machinery demands strict position holding without live air pressure, note that the standard adjustable cushion only decelerates the piston near stroke end and does not act as a brake; you should explore the BSE rod-lock variant or an external pilot-operated check valve. Furthermore, when replacing an existing actuator, you can drop in this cylinder using standard ISO 15552 mounting accessories like FA front flanges or TC centre trunnions.

AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE80 Standard Cylinder SE80AX150 FAQ

At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE80AX150 is dimensionally interchangeable per ISO 15552 and VDMA 24562 standards, meaning it shares the exact same mounting footprint and can be a direct replacement for other ISO 15552 profile cylinders using standard mounting hardware.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE80 Standard Cylinder SE80AX150

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE80AX150 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.