Airtac SE80 Standard Cylinder SE80AX150S
The AirTAC Airtac SE80 Standard Cylinder SE80AX150S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX150S
The AirTAC SE80AX150S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a robust 2513 N push force at 0.5 MPa and utilizes a 25 mm rod with an M20x1.5 thread. Equipped with a SUS420J2 stainless steel rod (code A), it is purpose-built for corrosive environments and washdown duty where standard carbon steel would fail.
This 80 mm bore unit features an extruded aluminum barrel without external tie rods, yielding a compact footprint that mounts flush against machine frames. The integrated magnet (-S) enables precise end-position detection using AirTAC CMSE reed or DMSE electronic sensors housed neatly within the body's three sensor grooves.
Airtac SE80 Standard Cylinder SE80AX150S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX150S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX150S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX150S Is Used
Corrugated Box Forming
Drives the folding mechanism on corrugated box erecting machines, using the 150 mm stroke and 2513 N push to cleanly crease heavy cardboard without stalling.
Bottling Washdown Gate
Actuates a diverter gate on a beverage bottling line, where the SUS420J2 stainless rod withstands daily chemical washdowns without pitting.
Metal Stamping Blank Feed
Pushes heavy steel blanks into a mechanical stamping press, utilizing the 3518 N push force at 0.7 MPa to overcome friction on the feed rails.
Is the Airtac SE80 Standard Cylinder SE80AX150S the Right Cylinder?
Selecting this 80 mm bore provides 2513 N of push at 0.5 MPa. If your application requires less force, stepping down to the 63 mm bore yields 1559 N; conversely, scaling up to the 100 mm bore provides 3927 N. To guarantee a true drop-in ISO 15552 replacement, match the 150 mm stroke, PT3/8 port thread, and appropriate mounting accessory like an FA front flange or TC trunnion.
Because this is a double-acting cylinder, it relies on continuous air pressure to maintain position. If air is lost or the valve is centered, the piston will drift; applications requiring fail-safe load holding should utilize a BSE rod lock variant or an external pilot-operated check valve. The field-adjustable air cushion at both ends allows you to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed operations.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX150S FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80AX150S is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other standard profile cylinders using the same PT3/8 ports and 80 mm footprint. It features a field-adjustable air cushion at both ends that decelerates the piston near stroke end via a needle screw, though it is not a locking mechanism.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.