
The AirTAC SE80 Standard Cylinder SE80AX155S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 155mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE80AX155S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a robust 2513 N push force at 0.5 MPa, utilizing an 80 mm bore and a 155 mm stroke to power demanding industrial loads.
This variant features a SUS420J2 stainless steel rod (code A) for superior corrosion resistance in washdown environments, and includes a built-in magnet (code S) for CMSE reed or DMSE electronic position sensing. The extruded aluminum barrel eliminates external tie rods, yielding a compact, flush-mounting body that is dimensionally interchangeable with other ISO 15552 cylinders.
| Model | Airtac SE80 Standard Cylinder SE80AX155S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives the heavy folding platen on automated case erecting machines, utilizing the 2513 N push force to crease thick cardboard while the SUS420J2 rod resists humid plant environments.
Secures heavy cast iron engine blocks during machining, relying on the 155 mm stroke to clear the work envelope and the DMSE electronic sensors to confirm clamp engagement to the controller.
Actuates a routing gate on a high-throughput packaging line, where the adjustable pneumatic cushioning absorbs the kinetic energy of rapidly cycling 80 mm bore loads at 30-800 mm/s.
Selecting this 80 mm bore makes sense when you need substantial thrust; stepping down to a 63 mm bore drops the 0.5 MPa push to 1559 N, while stepping up to a 100 mm bore increases it to 3927 N. If your mechanism must hold a vertical load without live air pressure, note that a standard SE cylinder will drift and you should specify a BSE rod lock variant instead.
This model provides a true ISO 15552 replacement footprint, meaning it drops directly into existing machinery using standard mounting accessories and PT3/8 ports. The field-adjustable air cushioning at both ends allows you to fine-tune end-of-stroke deceleration, protecting the 25 mm rod from mechanical shock during high-speed 30-800 mm/s cycles.
AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder
Quick checklist
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80AX155S is dimensionally interchangeable per ISO 15552 standards. You can drop it directly into existing mounts using standard accessories. It features a PT3/8 port and a built-in magnet compatible with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.