Airtac SE80 Standard Cylinder SE80AX160
The AirTAC Airtac SE80 Standard Cylinder SE80AX160 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 160mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke160 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX160
The AirTAC SE80AX160 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 2513 N push force at 0.5 MPa, utilizing an 80 mm bore and a 160 mm stroke to power demanding industrial cycles. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames without protruding hardware.
This specific SKU features a SUS420J2 stainless steel rod (option A) designed for corrosive and washdown environments. The cylinder incorporates field-adjustable air cushioning at both ends, allowing technicians to tune end-of-stroke deceleration via a set screw, thereby softening hard impacts at high cycling speeds. Note that this configuration lacks a built-in magnet, so it does not support CMSE or DMSE position sensors out of the box.
Airtac SE80 Standard Cylinder SE80AX160 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX160 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX160
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX160 Is Used
Palletizer Strapping
Drives the strapping and sealing head on an automated palletizer, using its 2513 N push force to tension steel bands securely around heavy loads in damp packaging facilities.
Beverage CIP Skid
Actuates diverter valves on a clean-in-place skid, where the SUS420J2 stainless steel rod withstands chemical washdowns and ambient moisture without degrading.
Wood Press Clamping
Secures timber blanks in a multi-spindle woodworking press, relying on the 36 mm adjustable pneumatic cushion to soften the 160 mm stroke end-stop under high dynamic loads.
Is the Airtac SE80 Standard Cylinder SE80AX160 the Right Cylinder?
Generating 2513 N of thrust at 0.5 MPa, this 80 mm bore cylinder fits neatly between the 63 mm class (1559 N push) and the 100 mm class (3927 N push), allowing you to scale up or down depending on your exact load requirements. Because it is a standard ISO 15552 profile, it serves as a drop-in dimensional replacement for other ISO 15552 cylinders, sharing standardized mounting accessories like FA front flanges or TC trunnions. Remember that a plain double-acting cylinder drifts when air is removed; if your process requires fail-safe load holding, consider the BSE rod-lock variant. At 160 mm stroke, side loads are minimal, but always verify rod-bearing loads if pushing off-center.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX160 FAQ
The SE80AX160 generates 2513 N of push force and 2268 N of pull force at 0.5 MPa, and 3518 N of push at 0.7 MPa, with a maximum thrust of 513 kgf at 1.0 MPa. It features a PT3/8 port, a 25 mm rod diameter, and an M20x1.5 rod-end thread.
Yes, the SE80AX160 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and can serve as a drop-in replacement for other ISO 15552 profile cylinders. Just ensure you match the PT3/8 port and your desired mounting accessory.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX160
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.