Airtac SE80 Standard Cylinder SE80AX160S
The AirTAC Airtac SE80 Standard Cylinder SE80AX160S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 160mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke160 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX160S
The AirTAC SE80AX160S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatic tasks. It provides a robust 2513 N push force at 0.5 MPa alongside a 2268 N pull force, making it well-suited for demanding industrial cycles. The extruded aluminum barrel design omits external tie rods entirely, yielding a compact, corrosion-resistant body that mounts flush against machine frames while freeing up surrounding space.
This specific configuration features a SUS420J2 stainless steel rod for superior resistance to moisture and washdown environments. The integrated magnet (-S) enables precise end-of-stroke detection using AirTAC CMSE reed or DMSE electronic sensors. Furthermore, the field-adjustable air cushioning at both ends allows technicians to dial in end-cap deceleration via a set screw, effectively softening hard mechanical stops during high-speed operations.
Airtac SE80 Standard Cylinder SE80AX160S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX160S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX160S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX160S Is Used
Palletizer Case Push-Off
Leveraging its 2513 N push force, this cylinder reliably shoves heavy filled cartons off the end of a palletizer line, utilizing the 160 mm stroke to clear the packaging zone efficiently.
Injection Mold Ejection
The SUS420J2 stainless rod withstands humid plant environments while providing the 2268 N pull force required to retract heavy ejection pins and stripper plates inside plastic injection molding machinery.
CNC Fixture Clamping
Securing heavy cast iron blocks during CNC machining, the 80 mm bore delivers the 3518 N push force at 0.7 MPa needed to hold the part rigidly against high-speed cutting forces.
Is the Airtac SE80 Standard Cylinder SE80AX160S the Right Cylinder?
If your application requires less force, stepping down to the 63mm bore yields a 1559 N push at 0.5 MPa, whereas moving up to the 100mm bore provides a substantial 3927 N push. Keep in mind that a standard SE cylinder relies on continuous air pressure to maintain its position; if air is lost or the valve is centered, the piston will drift. For position-holding safety, consider the BSE rod-lock variant. As a true ISO 15552 cylinder, this model offers a drop-in dimensional replacement for other ISO 15552 profile cylinders, sharing standardized mounting interfaces and port sizes (PT3/8). At a 160 mm stroke, the 25 mm rod and M20x1.5 thread handle moderate side loads, but any heavily offset load should be supported by an external guide to prevent rod-bearing bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX160S FAQ
At 0.5 MPa, this 80 mm bore cylinder delivers 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80AX160S is dimensionally interchangeable per ISO 15552 standards. You can drop it directly into existing ISO 15552 mounting hardware. The built-in magnet also works seamlessly with AirTAC CMSE reed and DMSE electronic sensors for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX160S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.