
The AirTAC SE80 Standard Cylinder SE80AX165 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 165mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE80AX165 is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous motion control. Delivering a robust 2513 N push force at 0.5 MPa (3518 N at 0.7 MPa), it handles heavy actuation loads with precision. The square extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies mounting and reduces contamination traps in demanding environments.
This specific configuration features a SUS420J2 stainless steel piston rod (option A) for superior resistance to moisture and washdown chemicals. The unit operates at speeds from 30-800 mm/s and relies on field-adjustable air cushioning at both ends to decelerate the piston smoothly near stroke end. It arrives without a built-in position sensor magnet, serving as a pure heavy-duty actuator.
| Model | Airtac SE80 Standard Cylinder SE80AX165 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Drives heavy corrugated cases onto pallets using 2513 N of thrust, leveraging the SUS420J2 rod to endure humid washdown environments.
Secures large cast iron blocks during machining, utilizing the 165 mm stroke to clear the work envelope during automated part loading.
Actuates stainless guide rails to route bottles between processing lanes, relying on the tie-rod-free profile to prevent debris buildup.
Selecting this 80 mm bore cylinder makes sense when your application requires substantial thrust. If 2513 N of push at 0.5 MPa is excessive, stepping down to the 63 mm bore yields 1559 N. Conversely, if you need greater capacity, the 100 mm bore provides 3927 N at the same pressure. With its 165 mm stroke, side loading is a moderate concern; ensure your rod bearing is not subjected to excessive bending moments by utilizing an external guide for heavy offset loads.
Because this is a double-acting air cylinder, it does not hold its position or lock the load when air pressure is removed or exhausted—the piston will drift. If your sequence requires fail-safe holding, pair it with an external pilot-operated check valve or explore the BSE rod-lock variant. Furthermore, its PT3/8 porting and standardized ISO 15552 mounting dimensions make it a direct retrofit for existing machines sharing the same footprint.
AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder
Quick checklist
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force increases to 3518 N. The maximum rated push force is 513 kgf at 1.0 MPa.
Yes, the SE80AX165 is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing machinery using standard mounting hardware, provided your accessory footprint matches the 80 mm bore specifications.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.