Airtac SE80 Standard Cylinder SE80AX170S
The AirTAC Airtac SE80 Standard Cylinder SE80AX170S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 170mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke170 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX170S
The AirTAC SE80AX170S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 2513 N push force at 0.5 MPa. It features an 80 mm bore and a 170 mm stroke, making it well-suited for medium-to-heavy industrial motion tasks.
This variant incorporates a SUS420J2 stainless steel rod for superior corrosion and washdown resistance, alongside a built-in magnet compatible with AirTAC CMSE and DMSE position sensors. The extruded aluminum barrel lacks external tie rods, keeping the body compact and flush-mountable, while the field-adjustable pneumatic cushioning at both ends allows you to dial in end-of-stroke deceleration for high-speed cycles.
Airtac SE80 Standard Cylinder SE80AX170S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX170S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 170 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX170S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×170 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX170S Is Used
CNC Pallet Clamp
Securing machining vices onto moving pallets where the 2513 N extend force locks heavy workholding fixtures firmly into place during high-speed milling.
Corrugated Box Flap Folder
Drives folding mechanisms on carton erecting lines, utilizing the 170 mm stroke and SUS420J2 stainless rod to withstand dusty, occasionally washdown packaging environments.
Heavy Sorter Diverter
Actuates routing arms on parcel sortation conveyors, relying on the adjustable end cushions to soften mechanical stops during rapid package redirection.
Is the Airtac SE80 Standard Cylinder SE80AX170S the Right Cylinder?
When sizing this actuator, compare its 2513 N push at 0.5 MPa against your actual load. If you need less force, stepping down to the 63 mm bore yields 1559 N; if your application demands more thrust, moving up to the 100 mm bore provides 3927 N. Because this is a double-acting cylinder, it will not hold a load in place if air pressure is lost or the valve centers—use a BSE rod lock for fail-safe positioning. At 170 mm of stroke, the 25 mm rod and M20x1.5 thread handle side loads well, but for any stroke over 300 mm you should add an external guide to prevent rod-bearing bending. As a true ISO 15552 profile cylinder, it serves as a dimensionally interchangeable drop-in replacement sharing the same mounting hardware and PT3/8 port.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX170S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, sharing standard mounting interfaces and PT3/8 ports. However, it is a double-acting cylinder and does not hold position if air is lost; for load holding, consider the BSE rod lock variant.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX170S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.