Airtac SE80 Standard Cylinder SE80AX175
The AirTAC Airtac SE80 Standard Cylinder SE80AX175 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX175
The AirTAC SE80AX175 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty linear motion. It delivers a robust 2513 N push force at 0.5 MPa and 3518 N at 0.7 MPa, utilizing an 80 mm bore and 175 mm stroke. The code "A" denotes a SUS420J2 stainless steel piston rod, making this specific unit highly suitable for corrosive or washdown environments where standard carbon steel rods would degrade.
Unlike traditional tie-rod bodies, this actuator features a square extruded aluminum barrel that allows for flush mounting and integrated sensor grooves on three sides. It includes field-adjustable air cushioning at both ends, allowing technicians to fine-tune the deceleration screw to soften end-of-stroke impacts at speed. Note that this SKU is built without a magnet, so it does not support CMSE or DMSE position sensors out of the box.
Airtac SE80 Standard Cylinder SE80AX175 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX175 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX175
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX175 Is Used
Pallet Diverters
Drives heavy pallet-routing gates in high-throughput logistics hubs, utilizing the 2513 N push force to reliably shift loaded pallets onto secondary transfer lines.
Pallet Stretch Wrappers
Actuates the film carriage clamp mechanism on rotary stretch wrappers, where the SUS420J2 stainless rod resists moisture from wrap pre-stretch lubricants and ambient humidity.
Injection Mold Ejection
Provides secondary part ejection for medium-tonnage injection molding machines, using its adjustable cushioning to safely decelerate heavy plastic parts without marking.
Is the Airtac SE80 Standard Cylinder SE80AX175 the Right Cylinder?
When sizing this 80 mm bore actuator, compare its 2513 N push force at 0.5 MPa against the neighboring standard bores: stepping down to a 63 mm cylinder yields 1559 N, while stepping up to a 100 mm bore provides 3927 N. Because this specific SKU lacks a built-in magnet, it cannot host AirTAC CMSE or DMSE electronic switches; if your application requires end-of-stroke position feedback, you must select an SE80 variant with the "S" option code. Furthermore, a plain SE cylinder relies on live air pressure to hold a load; if the valve is centered or air is lost, the piston will drift, requiring a BSE rod-lock variant or external pilot-operated check valve for secure holding.
As a true ISO 15552 profile cylinder, the SE80AX175 is dimensionally interchangeable with other ISO 15552 cylinders, offering a drop-in retrofit solution that shares standard mounting hardware. It uses a PT3/8 port and an M20x1.5 rod-end thread. Although 175 mm is a standard stroke, long unsupported strokes generally exceed the rod bearing's side-load capacity; always use an external guide rail to prevent binding and premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX175 FAQ
The SE80AX175 generates 2513 N of push force and 2268 N of pull force at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operating speed range for this 80 mm bore cylinder is 30-800 mm/s.
Yes, the SE80AX175 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and port dimensions as other ISO 15552 profile cylinders. It serves as a drop-in replacement for other brands' ISO 15552 cylinders, utilizing a PT3/8 port and M20x1.5 rod thread.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.