
The AirTAC SE80 Standard Cylinder SE80AX190 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 190mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE80AX190 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It generates 2513 N of push force and 2268 N of pull force at 0.5 MPa, utilizing an 80 mm bore and a 190 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames without snagging.
This specific SKU features a SUS420J2 stainless steel piston rod (option A) for superior resistance to moisture and corrosive washdowns. Because it lacks the -S magnet code, this unit does not support internal position sensing out of the box. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed 30-800 mm/s cycles.
| Model | Airtac SE80 Standard Cylinder SE80AX190 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 190 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×190 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Delivers 2513 N of thrust to securely hold and compress bulky corrugated packaging cartons during automated sealing and banding operations.
The SUS420J2 stainless rod withstands humid washdown environments in food and beverage labs while precisely moving sample trays over a 190 mm span.
Provides reliable 2268 N retraction force to pull stamped sheet metal parts out of progressive dies, utilizing adjustable cushioning to prevent end-stop shock.
When sizing this 80 mm bore actuator, compare its 2513 N push at 0.5 MPa against your actual load dynamics. Stepping down to the 63 mm bore reduces the output to 1559 N, which may undershoot heavy lifting requirements. Conversely, moving up to the 100 mm bore provides 3927 N of thrust but demands more structural support and air volume.
Since this configuration uses a 190 mm stroke, the unsupported rod length is moderate, but always verify side-load conditions. For strokes of 300 mm or longer, an external guide is strongly recommended to prevent rod-bearing bending. Remember that the adjustable air cushion only decelerates the piston near the stroke ends; it does not hold the load. If air pressure drops, the rod will drift, so a BSE rod lock variant is required for fail-safe holding. As a true ISO 15552 profile cylinder, it serves as a direct replacement for any standard ISO 15552 mounting interface using a PT3/8 port.
AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder
Quick checklist
This 80 mm bore cylinder outputs 2513 N push and 2268 N pull at 0.5 MPa, and 3518 N push at 0.7 MPa. The maximum thrust is 513 kgf at 1.0 MPa, with an operational speed range of 30-800 mm/s.
Yes, the SE80AX190 is dimensionally interchangeable with any ISO 15552 profile cylinder. It shares the standardized mounting footprint and PT3/8 port, allowing a direct retrofit without altering your existing tail or head mounting hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.