Airtac SE80 Standard Cylinder SE80AX195
The AirTAC Airtac SE80 Standard Cylinder SE80AX195 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 195mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke195 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX195
The AirTAC SE80AX195 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It generates 2513 N of push force at 0.5 MPa and 3518 N at 0.7 MPa, utilizing an 80 mm bore and 195 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting footprint that resists corrosion and simplifies fixture integration.
This specific SKU features a SUS420J2 stainless steel rod (option A) tailored for corrosive and washdown environments. Field-adjustable air cushions at both ends allow precise tuning of end-of-stroke deceleration to prevent hard impacts. Note that this unit lacks a built-in magnet, so it does not support CMSE or DMSE electronic position sensing.
Airtac SE80 Standard Cylinder SE80AX195 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX195 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 195 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX195
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×195 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX195 Is Used
Palletizer Case Pusher
Provides the 2513 N push force required to square and align heavy cardboard cartons on a packaging line before stretch wrapping.
Press Brake Demolding
Utilizes its 195 mm stroke and SUS420J2 stainless rod to eject formed sheet metal parts from hydraulic press brakes without rusting from coolant splash.
Wastewater Screen Wiper
Drives a mechanical wiper across bar screens in municipal water treatment plants, leveraging the washdown-resistant stainless rod to scrape debris safely.
Is the Airtac SE80 Standard Cylinder SE80AX195 the Right Cylinder?
If 2513 N of push at 0.5 MPa is too much force, step down to the 63 mm bore, which yields 1559 N. If your application requires more thrust, the 100 mm bore provides 3927 N. Because this is a standard 195 mm stroke under the 1500 mm maximum, it drops directly into existing ISO 15552 mounting interfaces using PT3/8 ports and M20x1.5 rod threads. Remember that a standard SE cylinder relies on live air pressure to hold a load; if pneumatic loss occurs, the piston will drift. For positive holding, consider the BSE rod lock variant. At 195 mm, side loads are moderate, but always verify rod-bearing bending limits and use an external guide for heavy offset loads.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX195 FAQ
The SE80AX195 delivers 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. The pneumatic port size is PT3/8.
Yes, the SE80AX195 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and hardware of other ISO 15552 profile cylinders. It features a corrosion-resistant SUS420J2 rod and adjustable air cushions at both ends to manage impact speeds.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX195
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.