verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE80 Standard Cylinder SE80AX200

The AirTAC SE80 Standard Cylinder SE80AX200 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke200 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$181.21 $188.71Save 3% Standard model — usually dispatched in 3-5 days
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Shipped from our own warehouse: most standard models dispatch in 3–5 days; custom and non-standard models take 8–10 business days. Transit time after that depends on the destination.
Compare every SE80 stroke, mounting and version on one page All SE80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7 h

About the Airtac SE80 Standard Cylinder SE80AX200

The AirTAC SE80AX200 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It delivers a robust 2513 N push force at 0.5 MPa and utilizes a SUS420J2 stainless steel rod (code A) to resist corrosion in washdown or high-moisture environments.

The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while exposing sensor grooves on three sides. Since this specific SKU lacks the -S magnet code, it cannot host CMSE or DMSE position sensors without modification. The field-adjustable air cushion at both ends allows technicians to tune end-of-stroke deceleration, preventing impact damage during high-speed 30-800 mm/s cycles.

Airtac SE80 Standard Cylinder SE80AX200 Technical Specifications

ModelAirtac SE80 Standard Cylinder SE80AX200
SeriesSE ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke200 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2513 N2268 N
0.7 MPa3519 N—
Max (@1.0 MPa)513 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE80 Standard Cylinder SE80AX200

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
80Bore size in mm.
×200Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE80 Standard Cylinder SE80AX200 Is Used

packaging

Palletizer Flap Folder

Folds heavy corrugated cardboard flaps on high-speed palletizing lines using 2513 N push force at 0.5 MPa, leveraging the SUS420J2 rod for humid washdowns.

precision_manufacturing

CNC Fixture Clamp

Secures heavy cast iron engine blocks during CNC machining, relying on the 36 mm adjustable cushion to soften 30-800 mm/s retraction stops.

factory

Beverage Bottle Diverter

Routes heavy glass beverage bottle flows on conveyor lines, where the no-tie-rod extruded aluminum profile prevents debris buildup and eases cleaning.

Is the Airtac SE80 Standard Cylinder SE80AX200 the Right Cylinder?

Delivering 2513 N of push force at 0.5 MPa, this 80 mm bore fits medium-to-heavy automation. If you need less force, stepping down to the 63 mm bore yields 1559 N push at 0.5 MPa; scaling up to the 100 mm bore provides 3927 N push. Because this is a standard 200 mm stroke, side-load bending is minimal, but long unsupported strokes still require an external guide to protect the rod bearing.

The SE80AX200 is dimensionally interchangeable per ISO 15552, serving as a direct replacement for other ISO 15552 cylinders using the same 80 mm bore, 200 mm stroke, PT3/8 port, and mounting accessories. Note that a plain SE cylinder drifts when air is lost—the cushion only decelerates the piston near stroke end, so for position holding you need a BSE rod lock or external check valve.

AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE80 Standard Cylinder SE80AX200 FAQ

At 0.5 MPa, the SE80AX200 delivers 2513 N push and 2268 N pull. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa.

Yes, the SE80AX200 is dimensionally interchangeable per ISO 15552. You can use it as a direct replacement for other ISO 15552 cylinders with an 80 mm bore, 200 mm stroke, PT3/8 port, and matching mounting hardware.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Most standard models are dispatched in 3-5 days.

bolt

Fast Reply

Most inquiries answered within 7 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE80 Standard Cylinder SE80AX200

Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.

Thank you. We received your request for SE80AX200 and will confirm price, availability and lead time — usually within 7 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.