Airtac SE80 Standard Cylinder SE80AX200S
The AirTAC Airtac SE80 Standard Cylinder SE80AX200S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX200S
The AirTAC SE80AX200S is a double-acting single-rod profile cylinder built to the ISO 15552 / VDMA 24562 standard, delivering a robust 2513 N push force at 0.5 MPa. It features a 200 mm stroke, an 80 mm bore, and a PT3/8 port. Engineered with a SUS420J2 stainless steel rod (code A), it is specifically configured for corrosive environments and washdown duty where a standard carbon steel piston would fail.
The extruded aluminum barrel lacks external tie rods, yielding a compact, flush-mount profile that resists corrosion and simplifies sensor placement across its three integrated grooves. Equipped with a built-in magnet (code S), this unit supports AirTAC CMSE reed and DMSE electronic solid-state position switches. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts during high-speed 30-800 mm/s cycles.
Airtac SE80 Standard Cylinder SE80AX200S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX200S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX200S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX200S Is Used
Palletizer Flap Folding
Drives the heavy mechanical arms that fold cardboard flaps on high-speed corrugated box palletizing lines, utilizing the 2513 N push force to overcome stiff board resistance.
Beverage CIP Washdown
Actuates diverter gates in dairy and beverage filling plants, relying on the SUS420J2 stainless rod to withstand aggressive cleaning chemicals and constant moisture.
Injection Mold Ejection
Powers secondary ejection arms that strip large molded plastic automotive interior panels from tooling, using the 200 mm stroke to clear the press bed safely.
Is the Airtac SE80 Standard Cylinder SE80AX200S the Right Cylinder?
Selecting this 80 mm bore makes sense when your application requires substantial thrust, as it provides 2513 N of push at 0.5 MPa. If you need less force and a smaller footprint, stepping down to the 63 mm bore yields 1559 N of push. Conversely, if your load demands more power, stepping up to the 100 mm bore provides 3927 N. Because this is a standard double-acting cylinder, it will drift and cannot hold a load if air pressure is lost or the valve is centered; for critical position-holding, consider the BSE rod-lock variant or an external pilot-operated check valve.
As a dimensionally interchangeable ISO 15552 cylinder, the SE80AX200S serves as a direct drop-in replacement for other ISO 15552 profile cylinders, matching the 80 mm bore, 200 mm stroke, PT3/8 porting, and standardized mounting accessories. The 25 mm rod and M20x1.5 thread provide excellent structural rigidity. For this 200 mm stroke, the internal rod bearing handles the load well, but always verify side-loading constraints to prevent premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX200S FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
Yes, the SE80AX200S is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the 80 mm bore, 200 mm stroke, and PT3/8 porting without altering your existing mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX200S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.