
The AirTAC SE80 Standard Cylinder SE80AX20S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 20mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE80AX20S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty positioning. It delivers a robust 2513 N push force at 0.5 MPa (3518 N at 0.7 MPa) across a compact 20 mm stroke. The extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant housing that mounts cleanly in tight machine envelopes.
This specific configuration incorporates a SUS420J2 stainless steel rod (code A) for superior resistance to moisture and washdown chemicals. The built-in magnet (code S) enables seamless integration with AirTAC CMSE reed and DMSE electronic position sensors, while the field-adjustable air cushioning at both ends lets you precisely tune end-of-stroke deceleration to prevent mechanical shock.
| Model | Airtac SE80 Standard Cylinder SE80AX20S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 2513 N push force at 0.5 MPa to reliably knock heavy stamped metal parts out of a die in automated fabrication lines.
Leverages the 20 mm short stroke and SUS420J2 stainless rod to rapidly fold corrugated cardboard flaps in high-cycle washdown packaging environments.
Employs the 80 mm bore power and DMSE sensor feedback to push heavy industrial crates onto a secondary sorting conveyor belt.
Selecting this 80 mm bore yields 2513 N of push at 0.5 MPa. If your application requires less force, the 63 mm neighbor provides 1559 N; stepping up to the 100 mm bore grants 3927 N. Because this is a standard 20 mm stroke, it avoids the side-load and rod-bearing bending risks inherent to longer unsupported strokes. To retrofit an existing machine, match the 80 mm bore, 20 mm stroke, PT3/8 port, and your required mounting accessory. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If pneumatic pressure is lost, the rod will drift, requiring a BSE rod lock for secure positioning.
AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder
Quick checklist
The SE80AX20S delivers a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force is 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, allowing a direct replacement for other standard profile cylinders using the same mounting interface. The -S magnet code means it is equipped for AirTAC CMSE reed switches and DMSE electronic sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.