Airtac SE80 Standard Cylinder SE80AX210S
The AirTAC Airtac SE80 Standard Cylinder SE80AX210S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 210mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke210 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX210S
The AirTAC SE80AX210S is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous linear motion. Operating at 0.5 MPa, it generates 2513 N of push force and 2268 N of pull force, scaling to a maximum output of 513 kgf at 1.0 MPa. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting environmental contamination.
This specific configuration includes a SUS420J2 stainless steel rod (option A) for superior resistance to corrosion and washdown chemicals. The built-in magnet (option S) enables seamless integration with AirTAC CMSE reed and DMSE electronic position sensors across the three available sensor grooves. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, absorbing kinetic energy to prevent hard mechanical impacts.
Airtac SE80 Standard Cylinder SE80AX210S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX210S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX210S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX210S Is Used
Palletizer Flap Control
With 2513 N of push force at 0.5 MPa, this 80 mm bore cylinder reliably diverts and aligns heavy corrugated cardboard flaps on high-speed palletizing lines.
Metal Stamping Ejector
The SUS420J2 stainless rod withstands coolant spray while providing the 513 kgf max output needed to eject stamped sheet metal blanks from progressive dies.
Beverage Bottle Rinser
Washdown-resistant construction and a 210 mm stroke make it ideal for actuating spray nozzles that invert and rinse glass beverage bottles in continuous bottling operations.
Is the Airtac SE80 Standard Cylinder SE80AX210S the Right Cylinder?
Stepping down to a 63 mm bore reduces the 0.5 MPa push capacity to 1559 N, whereas moving up to a 100 mm bore increases it to 3927 N, giving you clear scaling options around this 80 mm frame. As a standard ISO 15552 profile cylinder, it serves as a dimensionally interchangeable drop-in replacement for other ISO 15552 cylinders, sharing the exact same mounting interface and PT3/8 port size. At a 210 mm stroke, the unsupported load length increases; for heavy offset masses, incorporating an external guide rail prevents rod-bearing bending and extends seal life. Note that the adjustable air cushion only decelerates the piston near stroke end and does not hold the load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX210S FAQ
The SE80AX210S generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum of 513 kgf at 1.0 MPa. It features an 80 mm bore, a PT3/8 air port, and a 25 mm SUS420J2 stainless steel rod.
No, the double-acting SE cylinder relies on continuous air pressure to maintain position and will drift if air is lost or the valve centers. The adjustable air cushion only decelerates the piston near the end of the stroke; it does not function as a brake or lock. For true load holding, consider the BSE series with a rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX210S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.