
The AirTAC SE80 Standard Cylinder SE80AX220 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 220mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE80AX220 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering a robust 2513 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while resisting debris buildup.
This specific configuration features a SUS420J2 stainless steel rod (code A) for superior corrosion and washdown resistance, making it highly suitable for food, beverage, or pharmaceutical processing environments. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration via a simple screw, softening hard mechanical stops during high-speed 30-800 mm/s operations.
| Model | Airtac SE80 Standard Cylinder SE80AX220 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 220 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×220 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Leveraging the 2513 N push force and SUS420J2 stainless rod, this cylinder reliably diverts heavy crate traffic on washdown-grade beverage conveyor lines without corroding.
The 220 mm stroke and 3518 N thrust at 0.7 MPa securely lock large machining pallets into fixture beds, utilizing the field-adjustable cushion to prevent shock loading.
Delivers raw kinetic energy for pushing heavy coil stock into mechanical stamping presses, where the tie-rod-free extruded profile resists grease and metal chip accumulation.
Selecting this 80 mm bore provides 2513 N of thrust at 0.5 MPa, sitting neatly between the 63 mm bore (1559 N push) and the 100 mm bore (3927 N push) for scaling actuation power up or down. With a 220 mm stroke, this model requires careful attention to side-load dynamics; the 25 mm rod and M20x1.5 thread handle substantial radial stress, but an external guide bearing is strongly recommended to prevent rod-bearing bending over this extended travel distance.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other standardized profile cylinders, matching the PT3/8 port and standard mounting footprint exactly. Note that this SKU lacks a built-in position sensor magnet; if your workflow requires end-of-stroke signaling, you must select an -S coded variant to utilize CMSE reed or DMSE electronic switches. Furthermore, the adjustable air cushion only decelerates the piston near stroke end and does not hold a load if air pressure is lost—deploy a BSE rod lock for static holding.
AirtacDistr lists every SE80 order code with its price on one page at https://airtacdistr.com/products/airtac-se80-iso-air-cylinder
Quick checklist
At 0.5 MPa, the 80 mm bore provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with an absolute maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards, matching PT3/8 ports and standard mounting dimensions for direct retrofitting. However, the adjustable air cushion only decelerates the piston near stroke end; it does not lock or hold a load if air pressure is lost. For fail-safe load holding, an AirTAC BSE rod lock variant is required.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.