Airtac SE80 Standard Cylinder SE80AX225S
The AirTAC Airtac SE80 Standard Cylinder SE80AX225S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 225mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke225 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX225S
The AirTAC SE80AX225S is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous linear motion. It delivers a robust 2513 N push force at 0.5 MPa and utilizes a PT3/8 port. Designed with a 225 mm stroke, it provides the extended travel and thrust required for heavy positioning tasks.
This model features a SUS420J2 stainless steel rod (option A) for superior corrosion resistance in washdown or humid environments. The extruded aluminum barrel eliminates external tie rods, allowing for flush mounting and simplified sensor placement. A built-in magnet enables precise position detection using AirTAC CMSE (reed) or DMSE (electronic) switches.
Airtac SE80 Standard Cylinder SE80AX225S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX225S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX225S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX225S Is Used
Corrugated Box Forming
Drives the folding plungers on packaging machinery, utilizing the 2513 N push force to crease heavy cardboard and the SUS420J2 rod to resist humid plant air.
Press Brake Backgauge
Positions sheet metal stops on a press brake, relying on the 225 mm stroke for deep throat clearance and the built-in magnet for DMSE electronic position feedback.
Pharmaceutical Washdown Station
Actuates process doors on a cleanroom skid, where the stainless steel rod withstands chemical washdowns and the tie-rod-free extruded barrel prevents contamination traps.
Is the Airtac SE80 Standard Cylinder SE80AX225S the Right Cylinder?
When sizing this actuator, compare its 2513 N push at 0.5 MPa against the smaller SE63X225, which yields 1559 N, or the larger SE100X225, which provides 3927 N. This allows you to step up or down depending on your exact load requirements. The SE80AX225S is dimensionally interchangeable per ISO 15552, meaning it serves as a drop-in replacement for other ISO 15552 cylinders using identical mounting hardware.
Because the 225 mm stroke exceeds 300 mm is not triggered here, standard bearing loads apply, but always verify side loads. Note that the field-adjustable air cushion at both ends decelerates the piston near stroke end to soften hard impacts; it is not a locking mechanism. If your application must hold a load vertically without live pressure, use a BSE rod lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX225S FAQ
The SE80AX225S generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa operating pressure.
Yes, the SE80AX225S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounting hardware like FA front flanges or TC trunnions without altering the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX225S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.