Airtac SE80 Standard Cylinder SE80AX230S
The AirTAC Airtac SE80 Standard Cylinder SE80AX230S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 230mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke230 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX230S
The AirTAC SE80AX230S is a double-acting, single-rod profile cylinder built to the ISO 15552 / VDMA 24562 standard, delivering a robust 2513 N push force at 0.5 MPa. It features an 80 mm bore, a 230 mm stroke, and a SUS420J2 stainless steel rod (code A) specifically chosen for corrosive or washdown environments. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting buildup.
Equipped with a built-in magnet (code S), this unit supports AirTAC CMSE reed and DMSE electronic position sensors along the three sensor grooves machined into the barrel body. Field-adjustable air cushions at both ends allow technicians to dial in end-of-stroke deceleration via a setscrew, softening hard impacts when cycling loads at speeds up to 800 mm/s.
Airtac SE80 Standard Cylinder SE80AX230S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX230S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 230 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX230S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×230 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX230S Is Used
Stainless Steel Pallet Transfer
Pushes heavy food-grade pallets through washdown enclosures, utilizing the 2513 N push force and SUS420J2 rod to resist moisture and cleaning chemicals.
CNC Lathe Door Actuation
Opens and closes heavy machine tool safety doors, relying on the 230 mm stroke and adjustable air cushions to soften end-of-travel impact at high speeds.
Bottling Line Diverter Gate
Pivots sorting gates on beverage lines, where the built-in magnet triggers DMSE solid-state sensors to confirm gate position amid spray.
Is the Airtac SE80 Standard Cylinder SE80AX230S the Right Cylinder?
At 0.5 MPa, this 80 mm bore generates 2513 N of push force. If your application requires less force, stepping down to the 63 mm bore yields 1559 N; conversely, moving up to the 100 mm bore provides 3927 N. Remember that a standard SE cylinder will drift and cannot hold a load if air pressure drops or the valve centers—use a BSE rod lock for secure positioning. Because this 230 mm stroke is relatively long, the Ø25 mm rod and its bearing face increased bending loads; for heavy offset loads, add an external guide rail to prevent premature wear. As a dimensionally interchangeable ISO 15552 cylinder, it serves as a drop-in replacement sharing standardized mounting and PT3/8 port dimensions.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX230S FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force reaches 3518 N. The maximum push force is 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE80AX230s is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint, port sizes (PT3/8), and rod thread (M20x1.5) as other standard profile cylinders, allowing for a direct drop-in retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX230S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.