Airtac SE80 Standard Cylinder SE80AX240
The AirTAC Airtac SE80 Standard Cylinder SE80AX240 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 240mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke240 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80AX240
The AirTAC SE80AX240 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty positioning. It delivers a robust 2513 N push force at 0.5 MPa alongside a 2268 N pull force, making it well-suited for high-load automation. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames without protruding hardware.
This specific SKU features a SUS420J2 stainless steel rod (option A) for superior resistance to washdowns and corrosive environments. The stroke is set at 240 mm, and pneumatic cushioning at both ends is field-adjustable via a screw, allowing you to tune end-of-stroke deceleration and eliminate hard impacts. Note that this unit lacks a built-in position magnet, so it is not sensor-ready out of the box.
Airtac SE80 Standard Cylinder SE80AX240 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80AX240 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 240 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80AX240
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×240 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80AX240 Is Used
Palletizer Case Pushing
Provides the 2513 N push force at 0.5 MPa required to positively index heavy corrugated cartons onto a palletizing conveyor without bounce.
Metal Stamping Ejector
Leverages the SUS420J2 stainless rod to reliably eject formed sheet metal parts in a washdown stamping cell, resisting coolant corrosion.
Bottling Line Diverter
Utilizes the 240 mm stroke to actuate a heavy diverter gate on a high-speed bottling line, tuning the adjustable end cushions to soften high-speed stops.
Is the Airtac SE80 Standard Cylinder SE80AX240 the Right Cylinder?
If you are sizing this actuator, the 80 mm bore provides 2513 N of push at 0.5 MPa. Stepping down to a 63 mm bore drops the push to 1559 N, while stepping up to a 100 mm bore increases it to 3927 N, giving you clear boundaries for adjusting thrust. Because this is a standard ISO 15552 profile cylinder, it serves as a drop-in dimensional replacement for other ISO 15552 cylinders, sharing the same mounting footprint and PT3/8 port size.
Keep in mind that a plain SE cylinder does not hold its load if air pressure is lost or the valve is centered; the piston will drift, so a BSE rod lock is required for fail-safe holding. Additionally, at 240 mm of stroke, the Ø25 mm rod and thread handle moderate side loads, but any long unsupported stroke demands an external guide to prevent rod-bearing bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80AX240 FAQ
The SE80AX240 delivers 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. Its operating speed ranges from 30-800 mm/s.
Yes, the SE80AX240 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting interface, PT3/8 port, and M20x1.5 rod thread as competing ISO 15552 profile cylinders for easy retrofitting.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80AX240
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.